Music's over turn out the lights

| Are most LPKs the same? Short answer: Yes I have never had to modify any LPK kits, I have had to buy new parts when springs went flying  Only part I can think of that will be different for the 9mm AR is the BCG.
David W.
Rather fail with honor than succeed by fraud. -Sophocles |
| | | Posts: 3677 | Location: Winston Salem, N.C. | Registered: May 30, 2005 |  
IP
|
|
Member
| I've noticed small differences in individual components in LPKs from various vendors, especially the magazine catch, trigger group, selector and bolt catch. Different finishes, mold marks, etc. I've only ever had one part that was out of spec enough to need replacing (a selector that had bad detent stops). |
| | |
Member
| Different vendors can cut corners to save a small amount of bucks to sell you their stuff. I've seen selector detents that were not properly hardened/coated to save a couple of cents per, that wore out after about 20 applications.The same applies to bolt catches which turn out "beaver chewed" after the same 20 tries. Do your due dilligence on whatever you buy. Cheaper is not always better IMHO.Buy once cry once, rather than save 15-20bucks and regret it later. |
| | |
Raised Hands Surround Us Three Nails To Protect Us

| I used to get Rock River LPKs they are top notch. I have switched to these as they are much more customizable so I don't have to buy duplicate parts if I want to tweek the kit https://www.redbarnarmory.com/...rbacustomar15lpk.htmThough last build I stumbled upon a full Colt Target Match LPK so I had to snag it.
———————————————— Dark nights I wrestle with my flaws in the silence. The enemy inside me turns my thoughts into violence but higher than despair is the rock that I climb. You’re the refuge in my chaos Lord, hear my cry!!
|
| | |
The cake is a lie!

| Some use cheaper roll pins, and some use coil pins. |
| | |
quarter MOA visionary

| They are all the same but I only use them sans the grip and trigger. All my builds are upgrades in those areas. YMMV |
| | |
Raised Hands Surround Us Three Nails To Protect Us

| quote: Originally posted by CD228: For a 9mm build, I'd recommend a 9mm Specific parts kit. IIRC the Hammers are different because there are differences between a 9MM BCG and 5.56mm BCG. Between5.56mm LPKs you can spot small differences (casting seams, different grip screws and springs, plastic vs cast magazine release, etc.), if you do a side by side comparison. Price doesn't always directly relate to quality. I actually liked the Stock trigger on the older Stag LPKs($69) over the DD LPKs($99), but your mileage may vary. I found a couple manufacturers I trusted and stuck with them.
Pretty much everyone is cutting the 9mm BCGs for standard AR hammers anymore. So that is not an issue. If by chance one happens to get one that does it is a very simple fix with quick trip to Adco.
———————————————— Dark nights I wrestle with my flaws in the silence. The enemy inside me turns my thoughts into violence but higher than despair is the rock that I climb. You’re the refuge in my chaos Lord, hear my cry!!
|
| | |
I Am The Walrus
| quote: Originally posted by Black92LX: I have switched to these as they are much more customizable so I don't have to buy duplicate parts if I want to tweek the kit https://www.redbarnarmory.com/...rbacustomar15lpk.htm
Oooo, that's a nice find there. I'll be using them. It's exactly what I was looking for. I wanted a LPK but to drop in a CMC trigger with Magpul grip and Magpul trigger guard.
_____________
|
| | |
Bone 4 Tuna

| Last 2 builds used ALG Kits. I'd have no problems using theirs again, or BCM. I will pay a bit extra to make sure that kits are complete (and in my perception, likely of higher quality/choice small bits)
_________________________ An unarmed man can only flee from evil and evil is not overcome by fleeing from it. - Col Jeff Cooper
NRA Life Member
Long Live the Super Thirty-Eight
|
| | | Posts: 11173 | Location: Mid-Michigan | Registered: October 02, 2007 |  
IP
|
|
Sigless in Indiana

| In my experience there are some significant differences in quality.
A buddy of mine bought some cheap no-name stuff on ebay or somewhere.....
Had all kinds of function issues. We traced most of them to junk springs. One to a junk fire control group. |
| | |
Member
| I would be wary of no name kits. However, I wonder how many parts are all coming from the same source? Just because it has a big name label doesn't mean it is manufactured by them. |
| | |