I know Remington has been woefully lacking in QC with their products for some time now but I’ve been quite pleased with the V3’s I’ve picked up. About a case through the Tac-13 in its current configuration and just got the Tactical model ready for the range to see how she does.
Anybody else happy with their V3?
A Veteran, whether active duty, retired, national guard, or reserve, is someone who, at one point in his or her life, wrote a blank check made payable to "The United States of America" for an amount of "up to and including my life."
Posts: 2200 | Location: VA | Registered: June 12, 2004
I absolutely love my V3...but I have the Field Sport 26" synthetic and not the tactical. It is the softest shooting semi-auto made, has great balance, is easy to maintain and, the best part, if feels just like the 870's I grew up shooting.
I'm a big fan!
Look to see the whole V3 lineup expand, expand, expand....just not to the 20 gauge anytime soon according to my local Remington rep.
0:01
Posts: 4327 | Location: ALABAMA | Registered: January 05, 2008
Just had one come in the shop, the shell latch fell out according to the owner. I called Remington technical to see which way the retaining pin was installed. It is a headed pin . It is retained by the spring tension on the latch. Once I got the spring in the right place the pin dropped in. I put a wipe of fingernail polish in the pin hole.
Originally posted by elmer: Just had one come in the shop, the shell latch fell out according to the owner. I called Remington technical to see which way the retaining pin was installed. It is a headed pin . It is retained by the spring tension on the latch. Once I got the spring in the right place the pin dropped in. I put a wipe of fingernail polish in the pin hole.
There should be a roll pin that retains the shell latch to pivot pin. The pivot pin loads from the bottom of the receiver and the retention pin goes through the receiver to keep the pivot pin from falling out.
A Veteran, whether active duty, retired, national guard, or reserve, is someone who, at one point in his or her life, wrote a blank check made payable to "The United States of America" for an amount of "up to and including my life."
Posts: 2200 | Location: VA | Registered: June 12, 2004
The pin was a solid headed like an unthreaded screw. I specifically asked the tech if i should remove bolt and instill the pin from the top. I was instructed to install pin from the bottom. Small end first.
Correct, the pivot pin loads from the bottom with the smaller end going in first. Then there should be a roll pin that blocks/retains the pivot pin ensuring it stays in place.
A Veteran, whether active duty, retired, national guard, or reserve, is someone who, at one point in his or her life, wrote a blank check made payable to "The United States of America" for an amount of "up to and including my life."
Posts: 2200 | Location: VA | Registered: June 12, 2004
Tech didn't mention any roll pin. The gun is camo and still in the shop. Will look at it this afternoon. I asked what retained the pin and tech advised the spring tension on latch.
Glad to help. The only reason I knew about it is because I’m in the process of adding the oversized latch button to my TAC-13.
A Veteran, whether active duty, retired, national guard, or reserve, is someone who, at one point in his or her life, wrote a blank check made payable to "The United States of America" for an amount of "up to and including my life."
Posts: 2200 | Location: VA | Registered: June 12, 2004
I haven't taken bolt apart but did take i out. It is very specific to location on taking the operating handle out and in. The bolt to me was fidly in getting it back into receiver on the guide rods.
Was able to handle the Remmie V3 Tactical at the LGS and was impressed with the shotgun. Two questions from those who own this model: - Do you like the rifle sights or the ventilated rib model; why one versus the other? - not a fan of the polymer rear stock, although the Supercell recoil pad is nice... so, can one replace the polymer buttstock with another Remington wooden one, such as from an 870?
Thanks!
Posts: 3398 | Location: Mid-Atlantic | Registered: December 27, 2002
I prefer the rifle sights, if the Tac-13 had been offered with them I would have opted for them.
For the stock, the easiest way I found to change it was to use the 870 adapting stock shim from the Tac-13. I used the one I removed from my Tac-13 but hopefully Remington will sell it separately. With that part any 870 stock should mate up but you’ll need to figure out the bolt. I mounted a Magpul 870 SGA stock on my Tactical model and had to source a longer bolt than what Magpul includes.
A Veteran, whether active duty, retired, national guard, or reserve, is someone who, at one point in his or her life, wrote a blank check made payable to "The United States of America" for an amount of "up to and including my life."
Posts: 2200 | Location: VA | Registered: June 12, 2004
I have the VersaMax and it is by far the best shotgun I have ever shot. It really does a great job reducing recoil. I hope that Remington stays around to support these shotguns.
NRA Life Member
Posts: 1057 | Location: Bluegrass State GO CARDS!!! | Registered: July 31, 2008
