October 30, 2026, 11:02 AM
OttoSigHow to you orientate your slings?
I thought “backwards” was correct so that the flattest part was against the body.
The M1A I got a couple weeks ago came used and the previous owner had it opposite.
Have I been doing it wrong?
October 30, 2026, 11:43 AM
RogueJSKOfficial military way is with the latch facing towards the stock, so the mechanism and loose end aren't exposed on the outside where they could snag on things.
But since I only use my milsurp USGI rifles as collectibles and range toys, I install mine with the flat part of the buckle towards the stock, to keep the protruding edges from marring the wood and metal finish.
October 30, 2026, 12:52 PM
D_SteveA pdf of the install of the web sling:
https://manuals.plus/m/bb2c301...a973035612ac013d.pdfNote the statement at the bottom of the page as you can see this sling mounted in several different ways. The several different outfits I was in from '71-'73 with the M16 would mount the J hook with the open end toward the butt and the locking tab toward the handguard. Some people even used them with the J hook toward the hand guard

.
October 31, 2026, 11:22 PM
MikeinNC^^we did it just the opposite, with the j hook facing in towards the weapon, and the buckle inward so it wouldn’t catch stuff and open-possibly dumping the rifle onto the deck. So in Otto’s pick the one to the right circled in red is the correct way.
I still have my M1A nd AR set up like that.
November 01, 2026, 11:18 AM
straightshooter1The pic circled in red is the way we did it in the Army in the mid to late 60s with both the M14 and M16. And it's the way I still set my rifle's slings up.
Bob
November 04, 2026, 10:15 AM
Sauer KrautAs Rogue said. I orient mine with the tabs out so less likely to damage the stock or handguard. Also the tabs don’t dig into your shoulder if using the sling.