SIGforum
Early 551-2 SP & an FN Herstal FNC Sporter with AK5 furniture
December 24, 2019, 09:26 AM
PGTEarly 551-2 SP & an FN Herstal FNC Sporter with AK5 furniture
Thanks Josh. Was CCF the place down in Richmond, VA? I recall reading about a company there when I first dove into Swiss SIG stuff but the place in Richmond was no longer around by then.
December 24, 2019, 09:39 AM
OTDquote:
Originally posted by MG34_Dan:
quote:
Originally posted by OTD:
"Jenny" is not a brand. It's the name of the designer. His full name is Dr.Harald Jenny, he is a consultant, not a technician. His mount was adopted by the Swiss Armed Force. Manufacturer was most likely SIG-Neuhausen or one of their subcontractors.
Good Morning and Merry Christmas Daniel!
Have you seen the Manurhin version of this mount? I have a friend in Chile who may have a few. I worked with him back in '93 when I worked for the Carabineros de Chile in Santiago. I'm trying to see if I can get one to try out. Unlike the ones I have seen on the inter-web, the Chilean ones are finished in SIG grey and have the scope riser blocks. I'll let you know if I ever see one.
Merry Chistmas Dan,
The Manurhin mount I know resembles the commercial SIG clamping mount made for the aluminum adapters. It was just a bit shorter. Could it be that FAMAE build a compelte mount based on the SIG/Manurhin patter? A picutre would be interesting for sure.
December 24, 2019, 09:49 AM
PGTSo....wow, small world. Looking at the ATF letter on CCF's website, the aforementioned industry liason is someone I know personally and have been to his home. I worked with his wife for many years and we used to go over for parties and such. He's retired now but I knew he worked for ATF, didn't realize he had some relevance on this matter.
December 24, 2019, 11:42 AM
JoshNCquote:
Originally posted by PGT:
Thanks Josh. Was CCF the place down in Richmond, VA? I recall reading about a company there when I first dove into Swiss SIG stuff but the place in Richmond was no longer around by then.
Yes. CCF was in Richmond. Larry no longer has a ffl/sot.
---------------------------------------------
"AND YEA THOUGH THE HINDUS SPEAK OF KARMA, I IMPLORE YOU...GIVE HER A BREAK, LORD". - Clark W. Griswald
December 24, 2019, 12:31 PM
MG34_Danquote:
Originally posted by OTD:
Merry Chistmas Dan,
The Manurhin mount I know resembles the commercial SIG clamping mount made for the aluminum adapters. It was just a bit shorter. Could it be that FAMAE build a complete mount based on the SIG/Manurhin patter? A picture would be interesting for sure.
If/When I get one you'll be the first to see it. Unfortunately, I have no photos. I just took my buddy's word for what he had. It is my assumption these mounts were made for South American law enforcement agencies.
quote:
Originally posted by JoshNC:
quote:
Originally posted by PGT:
Thanks Josh. Was CCF the place down in Richmond, VA? I recall reading about a company there when I first dove into Swiss SIG stuff but the place in Richmond was no longer around by then.
Yes. CCF was in Richmond. Larry no longer has a ffl/sot.
I bought the
Die Hard AUG from Larry back in the day. Neither of us knew what it was. It was priced right so I jumped on it.
“Elections have consequences, and at the end of the day, I won.”
– Barack Hussein Obama, January 23, 2009
December 24, 2019, 07:20 PM
JoshNCquote:
Originally posted by MG34_Dan:
quote:
Originally posted by OTD:
Merry Chistmas Dan,
The Manurhin mount I know resembles the commercial SIG clamping mount made for the aluminum adapters. It was just a bit shorter. Could it be that FAMAE build a complete mount based on the SIG/Manurhin patter? A picture would be interesting for sure.
If/When I get one you'll be the first to see it. Unfortunately, I have no photos. I just took my buddy's word for what he had. It is my assumption these mounts were made for South American law enforcement agencies.
quote:
Originally posted by JoshNC:
quote:
Originally posted by PGT:
Thanks Josh. Was CCF the place down in Richmond, VA? I recall reading about a company there when I first dove into Swiss SIG stuff but the place in Richmond was no longer around by then.
Yes. CCF was in Richmond. Larry no longer has a ffl/sot.
I bought the
Die Hard AUG from Larry back in the day. Neither of us knew what it was. It was priced right so I jumped on it.
Very cool. I did not realize you bought that AUG from Larry. As I recall you also picked up one of the very rare 551 Commando barrel, gas tube, gas piston, and handguard kits he was selling that use a gas system in between the 552/553 and 551.
Larry always had great stuff.
---------------------------------------------
"AND YEA THOUGH THE HINDUS SPEAK OF KARMA, I IMPLORE YOU...GIVE HER A BREAK, LORD". - Clark W. Griswald
December 25, 2019, 05:40 AM
MG34_Danquote:
Originally posted by JoshNC:
Very cool. I did not realize you bought that AUG from Larry. As I recall you also picked up one of the very rare 551 Commando barrel, gas tube, gas piston, and handguard kits he was selling that use a gas system in between the 552/553 and 551.
Larry always had great stuff.
Yep. I got that kit from Larry. I still have it sitting in a box.
“Elections have consequences, and at the end of the day, I won.”
– Barack Hussein Obama, January 23, 2009
December 26, 2019, 08:57 AM
gearhoundsI owned an FNC fixed stock rifle for several years. I very much regret trading it away back in the mid 90’s. Completely smooth, reliable, and accurate. Just a great long gun- been a while since I’ve seen one in the wild.
“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown December 26, 2019, 09:16 AM
JoshNCquote:
Originally posted by MG34_Dan:
Yep. I got that kit from Larry. I still have it sitting in a box.
Those are neat. Basically what Exeter went with on the 556p/patrol/SBR. You should buy a current 553 import and swap that front end onto it.
---------------------------------------------
"AND YEA THOUGH THE HINDUS SPEAK OF KARMA, I IMPLORE YOU...GIVE HER A BREAK, LORD". - Clark W. Griswald
December 26, 2019, 10:18 AM
MG34_Danquote:
Originally posted by JoshNC:
Those are neat. Basically what Exeter went with on the 556p/patrol/SBR. You should buy a current 553 import and swap that front end onto it.
I already have two 550s and three 551s. That's enough. I guess I could put it onto my ex-PD 551 SWAT SBR. Or maybe I should just pass it onto someone else who would appreciate it. Like I said, it just sits in a box.
Here is a DS Arms 1990s Sig sales flyer showing the 551 Micro.
“Elections have consequences, and at the end of the day, I won.”
– Barack Hussein Obama, January 23, 2009
December 26, 2019, 08:19 PM
JoshNCquote:
Originally posted by MG34_Dan:
quote:
Originally posted by JoshNC:
Those are neat. Basically what Exeter went with on the 556p/patrol/SBR. You should buy a current 553 import and swap that front end onto it.
I already have two 550s and three 551s. That's enough. I guess I could put it onto my ex-PD 551 SWAT SBR. Or maybe I should just pass it onto someone else who would appreciate it. Like I said, it just sits in a box.
Here is a DS Arms 1990s Sig sales flyer showing the 551 Micro.
Enough?! You don’t have a 553. You should remedy that ASAP.
---------------------------------------------
"AND YEA THOUGH THE HINDUS SPEAK OF KARMA, I IMPLORE YOU...GIVE HER A BREAK, LORD". - Clark W. Griswald