SIGforum
After 11 years, I got the final piece of the puzzle
November 16, 2026, 11:08 AM
benny6After 11 years, I got the final piece of the puzzle
I got my suppressor in today.
Will test it tomorrow.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
November 16, 2026, 11:23 AM
old rugged crossSweet. Is this your first suppressor or is it something Xtra special?

"Practice like you want to play in the game"
November 16, 2026, 11:28 AM
benny6It's my first full size suppressor. I've had a 22lr can for a long time, but never had one for my big rifles or pistols.
I'm going to get the Plan B hub and move it to my AR's, my 6.5-284 and my Savage 308 as well as other M14's.
And it is extra special. It's the top of the line flow-through suppressor. 3D printed porous titanium. I shouldn't have to modify my gas system at all for this. It's not supposed to generate back pressure.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
November 16, 2026, 12:24 PM
rkentmBenny, that is a SWEET set-up! Cannot wait to hear your range reports!
_________________________
Admit Nothing.
Deny Everything.
Make Counter-Accusations.
November 16, 2026, 06:47 PM
sigarmsp226Benny - I know you know this but it is worth sharing for others (I wish I had known).
Make sure you have proper alignment between the barrel and suppressor. I purchased alignment rods
AFTER I sent the end cap of my first rifle suppressor down range. The 308 bullet just barely nicked the suppressor cap but it was all that it took.
November 16, 2026, 09:07 PM
lymanhow quiet is that?
always wanted a vintage Sonics type for my M14,, just never found one at the right price,
https://chandlersfirearms.com/chesterfield-armament/
November 16, 2026, 09:11 PM
benny6I checked the alignment. I have a 36" drill rod that I stuck down the bore. No interference that I could see.
I don't know how quiet it is. I just got it today. I'll be shooting it tomorrow.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
November 16, 2026, 09:58 PM
djpaintlesSWEET!!!
Wouldn’t be surprised to hear that velocity and accuracy improve. I’d be interested to hear how it does on your rifle……………dj
Remember, this is all supposed to be for fun...................
November 16, 2026, 09:58 PM
hrcjonalmost anyone testing says its exceptionally quiet.
“So in war, the way is to avoid what is strong, and strike at what is weak.”
November 16, 2026, 10:19 PM
MikeinNCDo You have to use a different gas piston on the M1A with the suppressor?
“You may beat me, but you will never win.” sigmonkey-2020
“ in my opinion, anything that we can do to trigger a potential aneurysm in a leftist is a good thing and worth doing” nhtagmember 2025 November 16, 2026, 10:58 PM
benny6quote:
Originally posted by MikeinNC:
Do You have to use a different gas piston on the M1A with the suppressor?
Supposedly, not with this one. That's why I chose this one versus any other. It's supposed to be the best. Plug n play, no mods required.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
November 17, 2026, 11:42 AM
Expert308Maybe it's just me, but something seems just really wrong about an M-14 in a chassis type stock. What's next, an M1 Garand in a chassis?

November 18, 2026, 01:01 AM
P220 Smudgequote:
Originally posted by benny6:
It's not supposed to generate back pressure.
Not
quite accurate, but it's one of the very, very low backpressure offerings on the market. There is no zero backpressure suppressor as of yet.
You're going to be pleased with it, I have no doubt. The Vent series are fantastic.
______________________________________________
"If the truth shall kill them, let them die.”
"A man who does not read has no appreciable advantage over a man who cannot read."
November 18, 2026, 01:06 AM
KMitch200quote:
Originally posted by djpaintles:
I’d be interested to hear how it does on your rifle.
Me too!
--------
After the game, the King and the pawn go into the same box.
November 18, 2026, 03:18 PM
djpaintlesquote:
Originally posted by Expert308:
Maybe it's just me, but something seems just really wrong about an M-14 in a chassis type stock. What's next, an M1 Garand in a chassis?
Why not a M-1 Garand Scout Chassis?? We’ve had plenty of Garands for plenty long enough. Don’t mess with collector rifles, have fun with and enjoy the rest!
Remember, this is all supposed to be for fun...................
November 18, 2026, 04:03 PM
benny6I got it out today and loved it! There is a little blowback in the face, but not much.
Top cases were unsuppressed, bottom cases suppressed.
I tried it on my Savage too and I was blown away by how accurate my Savage is with the can and with 147 grain Igman surplus ball ammo! 15 shots for 0.8 MOA!
I'll do some accuracy testing with the M25 later with some good ammo. Today was about 2 MOA with the Igman surplus ammo.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
November 18, 2026, 04:31 PM
MikeGLINice action shot!
Hey, sorry for the minor drift, I see your measurement with the calipers above, but I've also heard of folks measuring from the center of the impact rather than the outside edge. Is there a correct way to do this?
NRA Life Member
Steak: Rare. Coffee: Black. Bourbon: Neat. November 18, 2026, 04:43 PM
elmerMeasure outside to outside and then deduct the bullet diameter. This is calculated as center to center. The .85 group shown above would be .85 - .264 so would be .586 center to center
November 18, 2026, 05:22 PM
Mars_AttacksThat
is
AWESOME
____________________________
Eeewwww, don't touch it!
Here, poke at it with this stick.
November 18, 2026, 09:34 PM
benny6I open up my digital calipers to 0.308" and hit ZERO. Then I measure the outside edges of the group to find my center to center group. If you look at the numbers on the caliper body, it reads almost 1.2". So 0.850" is the center to center group.
I really need to start using a group measuring app.
A note on my Savage. It was made in the mid-1980's which makes it approximately 40 years old. It started life as the cheapest of the cheap "Economy" 110's chambered in 270 and had a cheap wood stock. Of the original rifle, only the receiver and the trigger are original. Everything else has been replaced.
I once had it re-barrelled with a used 30-06 hunting barrel and it held 3" groups that would shift 6" between range trips. I shelved it and actually loaned it to someone who moved and took it with him. I tracked him down and got my rifle back after 5 years.
I tore it down and spent 10 years rebuilding it. Here are the build specs:
-Benchmark MTU profile 22" barrel in 308, 5R 1:10" twist (maybe 1:11").
-Benchmark SS barrel nut
-New jeweled Savage bolt
-McMillan HTG stock in GAP camo, internal blind magazine
-Savage metal trigger guard
-EGW long action Pic rail, bedded to the receiver
-LaRue Tactical throw lever rings, 30mm
-US Optics LR-17moa 3.2-17x44 FFp scope with illuminated reticle (MDMOA)
-NSS heavy duty recoil lug
With hand loads, I've shot 1/4" groups with this thing.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com