SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    Having a buddy who is a machinist and gunsmith is nice….
Go
New
Find
Notify
Tools
Reply
  
Having a buddy who is a machinist and gunsmith is nice…. Login/Join 
Member
posted
Happy Sunday guys. Before you we have a custom Savage 10 in 223. This gun was originally a standard 24” 223 that my buddy machined a 30” Shilen barrel with 6:5 twist to shoot the really heavy bullets.

If you notice it does not have a barrel nut and looks very clean. Stock is a MDT Oryx chassis, optic is a DNT The One 7-35 with EGW 34MM rings on a EGW 20 moa rail. Suppressor is an Otter Creek Polonium 30. I have a Timney trigger inbound to swap out the Accutrigger.

The gun is a heavy beast at 20lbs and shoots light out with my 80gr Hornady ELDM and 80gr SMK hand loads. They were smacking the 600yd steel every time. I’m going to run some 88gr ELDM’s next week and move out to 850. That days shooting was just breaking in the barrel with 50rds first time out.

My planned use for this gun is to take some of the pressure off my GAP PPR 6GT. She sure is a fun one…lol.



This message has been edited. Last edited by: usncorpsman,
 
Posts: 1278 | Location: Orange Park, FL. | Registered: November 26, 2000Reply With QuoteReport This Post
7.62mm Crusader
posted Hide Post
Savage never had it so cool. That long heavy barrel is off the charts. Let us know how it does at the 850.
 
Posts: 18358 | Location: The Bluegrass State! | Registered: December 23, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    Having a buddy who is a machinist and gunsmith is nice….

© SIGforum 2026