April 05, 2020, 01:19 PM
ShackelfordOptic mount for 308 semi
Form 1 just came back on my SAN 751. I have an AccuPower that I am trying to mount on it. However, the standard AR height Warne scope mount I have is just way too high. If I mount my Aimpoint PRO, the comfortable height puts the dot in the lower quarter.
Is there a recommended low mount that will work for a standard scope? Do I dare use a pair of standard rings instead of a unitary mount, or would there be too much flex from a .308 and would just destroy the optic?
April 05, 2020, 03:33 PM
hrcjonI'm confused. You can get mounts in just about any height you need. From a zillion vendors. No issue on std. rings either, but if you want an easily removable one shouldn't be a problem. What height do you need?
April 05, 2020, 04:27 PM
ShackelfordSorry, I am asking if I need a unitary mount on a .308 semi. The Warne unitary mount I have now (a XSKEL30 MSR mount) is just way too high, but if I just use a pair of rings, will the receiver flex too much and cause damage to the scope?
April 05, 2020, 04:31 PM
hrcjonNot in my experience. Nor have I heard of such a thing.
April 05, 2020, 04:48 PM
RHINOWSOI would just use some appropriate height rings.
April 05, 2020, 09:11 PM
Brett BOutstanding rings in about any height that you could want:
https://www.seekinsprecision.c...rings-30mm-tube.htmlI use the 1.26” extra high to mount a Nightforce 2.5-10x42 on my SCAR 17S. I have several sets of Seekins rings on other rifles and they have always been superb.
April 05, 2020, 09:54 PM
fritzquote:
Originally posted by Shackelford:
I am asking if I need a unitary mount on a .308 semi. The Warne unitary mount I have now (a XSKEL30 MSR mount) is just way too high, but if I just use a pair of rings, will the receiver flex too much and cause damage to the scope?
Receiver flex is generally not an issue for AR10s and similar rifles. I know little of the SAN 751.
SCAR 17 rifles have a reputation of damaging certain scopes -- evidently some less robust, higher magnification zoom scopes. Even some expensive scopes. Whether it is the SCAR's receiver flex (which has been demonstrated in slow motion video) or its recoil forces, a solid one-piece scope mount is recommended for SCAR 17s.
One-piece mounts are generally designed for ARs and similar rifles. It is expected to have the best eyebox with the center of the scope being about 2.5 inches above bore. Thus, many one-piece mounts add about 1.5 inches. Or in the case of your Warne, 1.435 inches. There are a few one-piece that don't raise the scope as much. I know Nightforce has one model that adds only 1.125 inches.
If you need mount that's in the .8 inches to 1.0 inches ballpark, two-piece traditional rings are likely the best option. You should calculate your desired ring/mount height prior by buying anything.
I am guessing that your rifle would be fine with two-piece rings. Nevertheless, I have one-piece mounts on all my ARs -- I think it's just a better way to go.
April 06, 2020, 08:15 AM
Voshterkoff https://www.americandefenseman...-rifle-scope-mounts/Unless you really want built in cant, I would just use the correct height rings. I like Seekins rings.
I forgot, there is also Spuhr.
https://spuhrwebshop.com/en/isms/sp/April 06, 2020, 09:53 AM
hrcjonBobro has a very low mount that I have used. I like their stuff because you can get the qd levers on the side you want.
April 11, 2020, 05:55 PM
Belgian BlueYou might consider a Spuhr Mount. They offer lots of options in mounting height. One thing is for sure, you’re going to have a very nice rig when you’re done.
Congrats on that SAPR!
April 11, 2020, 08:03 PM
Slippery PeteAwesome rifle. I don't think you risk anything going with regular rings. I haven't tried to find a "low" height 1 piece mount. Interesting question I never thought of.
Anyway I hope you'll put up pics of it, and let us know how it does. Super cool rifle.