October 24, 2026, 08:49 PM
MRBTXGun safe with no electricity- lighting and desicant recommendations
Acquired an older but nice, small (24" x20" x55") , fire resistant safe for a couple long guns, a few handguns, and jewelry. It will reside in our closet. It is not wired for electricity, but I want to put an led light in it and something for humidity control. What are y'all using for this type of safe? Thanks
October 24, 2026, 09:01 PM
RogueJSKNone of my safes are wired for electricity.
I use cheap no-name AA battery powered motion-activated stick-on LED lights (which last about 2 years on one set), along with Eva-Dry rechargeable dessicant packs with built-in electrical plugs (which last about a month before needing to be plugged into an outlet overnight to dry out/recharge the beads):
https://www.amazon.com/Improve...ifier/dp/B000H0XFCS/October 24, 2026, 09:08 PM
lymandrill a small 1/4 inch hole in the bottom side corner,
Golden Rods usually come w/o a plug installed so you can push the wire thru and then attach the plug,
once installed, just fill the hole w/ wire with silicone caulk
October 26, 2026, 04:38 PM
Black92LXEva Dry and rechargeable LED strips with motion activation.
I also keep a dehumidifier set to 50% in the room where the safe is. So if I forget to recharge the Eva Dry it’s not a huge deal
October 27, 2026, 05:49 PM
MRBTXWent the Eva Dry route, very handy. I'll get a rechargeable led for lighting. I'll probably drill it later, for right now this will work fine. Thanks yall.