“It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.”
Posts: 5647 | Location: Upstate NY | Registered: February 28, 2002
The 4.25 “ one I saw had the vent rib with 3 spaces in it, like the 6”, the stainless only has the 2 and looks much better in my opinion, if it was the 2 spaces it would look much more like the original
Claims of the 4.25" vent rib 3 spaces photos are pre - production. Saw another pic with 2 space vent rib floating around. Sure there will be plenty more photo's and info shortly.
———————————————— The world's not perfect, but it's not that bad. If we got each other, and that's all we have. I will be your brother, and I'll hold your hand. You should know I'll be there for you!
It sure looks to have a beautiful deep and shiny finish, at least in the photos, thank you Colt and CZ!
I'm curious just how or what process they are bluing it? I've been hearing in recent years how the process or chemicals used to traditionally blue guns like they did in the past just can't be done anymore due to EPA, OSHA, or whatever. So are they bluing similar to how they did in the past or is there a new process that gives similar results?
No car is as much fun to drive, as any motorcycle is to ride.
Originally posted by dozerd8: Claims of the 4.25" vent rib 3 spaces photos are pre - production. Saw another pic with 2 space vent rib floating around. Sure there will be plenty more photo's and info shortly.
I also saw a picture of the 4.25 inch Python with the two space vent rib. I am seriously interested in this revolver. I do prefer the looks of the two space vent rib.
Originally posted by ridewv: It sure looks to have a beautiful deep and shiny finish, at least in the photos, thank you Colt and CZ!
I'm curious just how or what process they are bluing it? I've been hearing in recent years how the process or chemicals used to traditionally blue guns like they did in the past just can't be done anymore due to EPA, OSHA, or whatever. So are they bluing similar to how they did in the past or is there a new process that gives similar results?
You can still get a deep blued finish from manufacturers like Standard Manufacturing and Turnbull.. and Colt still have a deep bluing on the SAA models, so I would think that these new Pythons get the same ol' bluing treatment as old school.
Tomorrow’s battle is won during today’s practice. - Samurai maxim
Posts: 753 | Location: Northeast US | Registered: August 03, 2013
Originally posted by ridewv: I'm curious just how or what process they are bluing it? I've been hearing in recent years how the process or chemicals used to traditionally blue guns like they did in the past just can't be done anymore due to EPA, OSHA, or whatever. So are they bluing similar to how they did in the past or is there a new process that gives similar results?
I’ve been to Colt’s factory in CT. The real secret to Colt’s beautiful royal bluing isn’t much of a secret, it’s the amazing polishing that gets done on the firearms. Unlike other operations, you don’t just start out polishing final product at Colt, it’s very much an apprentice working their way up to journeyman over years of building skill kind of process. The chemicals aren’t that bad. Yes the chemicals will need to be disposed of as hazardous waste, but they aren’t any worse than lots of typical chemical processes. In fact, I’d argue that the chemicals in a lot of more modern treatments such as Nitro Carburizing, Melonite, etc. or even PVD are far nastier, and more costly to dispose of. I think the biggest reason that bluing has generally fallen out of favor is that it takes more labor to obtain a good finished result, and people generally want a more durable finish. Bluing might look beautiful but it’s not terribly durable and definitely requires maintenance, and most people don’t want to invest the time to keep a blued gun pretty. So more effort (and cost) coupled with less durability is the real reason why bluing has fallen out of favor. The chemicals really aren’t the problem.
“It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.”
Posts: 5647 | Location: Upstate NY | Registered: February 28, 2002
