SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    What Suppressor Height Sights are you using on your 226?
Go
New
Find
Notify
Tools
Reply
  
What Suppressor Height Sights are you using on your 226? Login/Join 
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted
Need some suppressor height sights for my 226. Don’t need tritrium but would like fiber optic if possible.
Do want something with some sort of contrast between the front and rear.


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25783 | Registered: September 06, 2003Reply With QuoteReport This Post
Member
posted Hide Post
it's been a day or two. So I will take a stab at this.
Okay on to actually finding a solution for you.
first up is all black us made.
https://suarezinternational.co...sight-sig-p226-p320/
https://suarezinternational.co...sight-sig-p226-p320/

Second up is rainier arms IIRC 320 and p226 sights are the same.
https://www.rainierarms.com/ra...ight-sight-set-logo/

from galloway precision, Dawson P .455 suppressor front sight
https://gallowayprecision.com/...sig-suppressor-sight
https://gallowayprecision.com/...or-sig-sauer-pistols

From dawson directly.
Front
https://dawsonprecision.com/si...-optic-front-sights/
Rear
https://dawsonprecision.com/si...r-optic-rear-sights/


I have only the 2 p226's as of now that I use a can on.


P226 with p220 rimfire kit on it, so, with my can the sights are not an issue.


p226 elite SAO that I use a ghost m on. Yes the can blocks the sights. I have so many guns with threaded barrels that to buy suppressor height sights for them all it would run north of 800 bucks. If I could actually find SHS for them all.

So, I aim through the can. I shit you not. It is fast, it is easy. Lock on to the front sight with your eye, and point downrange. No, my groups are not the size of a quarter, but more 2.5 inches wide and tall. I am faster and find it a much cheaper resolution than buying installing, sighting in. 2 dozen pairs of sights.

(now with si-co threaded barrel)



I will note that the aim through the can sounds frustrating at first, but I use the tactic on all my normal height guns. CZ,941f, beretta, p225, p85, and all my HK's.
The p225 with normal sights.

The ruger p85 MKII, with it's target sight through the can 30ft


The Jericho 941f

150 rounds through the 941F at 25ft. working the double da/sa


The only time I find a faster AND more accurate way to do it is when I use a red-dot like on my BNT MKII and Sig 365xl.

 
Posts: 6633 | Location: Virginia | Registered: December 23, 2010Reply With QuoteReport This Post
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted Hide Post
Thanks for the info.
I did not realize they were the same as the 320. That Rainier set looks to be exactly what I was wanting.

I have been shooting through the can for a bit. Not bad really just figured I would raise them up a bit.


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25783 | Registered: September 06, 2003Reply With QuoteReport This Post
Member
posted Hide Post
other places mark the p320 and p226 sights as the same. I thought I remembered reading that.

The dawson's precision offers a quick tool to do the measurements and figure out what size you need.
 
Posts: 6633 | Location: Virginia | Registered: December 23, 2010Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    What Suppressor Height Sights are you using on your 226?

© SIGforum 2024