SIGforum
Cajun Gun Works - Anyone used them/their products before?
January 23, 2018, 08:42 PM
vulrathCajun Gun Works - Anyone used them/their products before?
I just bought myself a brand-new CZ P-09, one of the ones with a threaded barrel, in 9mm. I've got some Talon custom grip tape coming in the mail, which leaves on my punchlist 2 things before I can introduce it into my carry rotation (aside from the usual break-in and testing procedures): the holster and a set of night sights.
I see CZ apparently offers rear sights on their parts site, but not front sights; otherwise I'd prefer to go that route.
So, anybody have any experience with them, either good or bad?
Link to sights in question
"In order to understand recursion, you must first learn the principle of recursion."
January 23, 2018, 09:00 PM
12131quote:
Cajun Gun Works - Anyone used them/their products before?
They have a big following on here. They do great work.
Q
January 23, 2018, 09:05 PM
casI've only bought parts from them. They are a reputable company.
_____________________________________________________
Sliced bread, the greatest thing since the 1911.
January 23, 2018, 09:28 PM
Ryanp225I have a P09 with a lot of CGW goodies.
So far I've installed their competition hammer spring kit, d/a roller bearing, and short reset kit. I also have the talon skate board tape and Dawson f/o sights. This thing shoots so good I'm probably going to have to get a P07 as well.
January 23, 2018, 09:35 PM
Sunset_VaGood company to deal with.
I have a FDE P 09, the only mod I have done and wanted to do is intall Cajun Gun Works firing pin upgrade. I was sent the wrong replacement firing pin spring, the owner caught the mistake , notified me, and mailed me the correct spring.
美しい犬
January 23, 2018, 09:37 PM
JDGCGW is gtg!
January 23, 2018, 09:49 PM
dusty3030Grayguns is to Sig's = Cajun Gun Works to CZ's
In other words, they are your go to for CZ, no worries go for it.
January 23, 2018, 09:55 PM
vulrathAwesome. Glad to hear I stumbled upon a reputable manufacturer. I'm one step closer to my goal of another carry gun.
"In order to understand recursion, you must first learn the principle of recursion."
January 23, 2018, 10:44 PM
FN in MTIt's a lengthy process until You actually get the gun back. First send an e mail notifying You want some work done.....to put You on the list. In a few months they will contact You and you will send your gun. Few more weeks oor a month...Whoever is doing the work will call and go over what You want. Then in a few more weeks it's done.
A 75B I shipped maybe 6 weeks ago is done, shipped back to me TODAY. Arrives Thursday.
They are good folks. Very loyal following over on the CZ forums.
Friendly folks...meeting up with one of their Smiths tomorrow at SHOT.
January 23, 2018, 10:54 PM
vulrathI plan on purchasing the parts and having them shipped to me so that I or a local gunsmith can install them. Hopefully that will cut down on the wait times a little.
"In order to understand recursion, you must first learn the principle of recursion."
January 24, 2018, 12:42 AM
dc54I have a P07 that I ordered from them with what I believe is called their professional package. Great shooting pistol that is now the DA/SA gun I shoot the most. I also have a RAMI that I had a local gunsmith install their parts in. Incredible DA and SA trigger pulls. I don't think I've shot my Sigs since getting these pistols.
Sigs, HKs, 1911s, Berettas, Glocks and SW revolvers
January 24, 2018, 06:35 AM
TommydoggI've ordered parts from them and had them mill a pre B Slide for a sight. Outstanding work and fast shipping on quality parts!
___________________________
"I Get It Now"
Beth Greene
January 24, 2018, 06:56 AM
CQB60Nobody does Cz’s better. You can be confident with CGW...
______________________________________________
Life is short. It’s shorter with the wrong gun…
January 24, 2018, 08:40 AM
GusMcCraeYou won't go wrong using David Milam and family. They are great to work with! I have more CZs than I care to admit where they performed their magic.
January 24, 2018, 08:47 AM
bpnkrtnTheir work can not be beat ... I'll also say the same thing for their integrity.
A cajunized PCR with Pro package is simply "awesome" ... for lack of a better word.
January 24, 2018, 10:11 AM
tuumunzas the guys have posted cajun,or cgw to cz guys,is the gray guns of the cz world.
angus hobdell is the main gunsmith,I have talked to them several times about cz guns.
They are top shelf guys,and back up there products and work
January 24, 2018, 11:44 AM
Ken 3DI have two CGW guns, a cz sp-01 and a rami, both bought new from them in 9mm and both with their defensive carry packages installed. As noted above, very nice people to deal with and great gunsmithing for cz.
January 24, 2018, 08:19 PM
pulicordsI sent two CZs to them for custom work and couldn't be more pleased with the service and end results. Great people!
My "Cajunized" CZ75 Compact (Safety) and PCR (Decocking Lever):
"I'm not fluent in the language of violence, but I know enough to get around in places where it's spoken."
January 25, 2018, 09:34 AM
ArLEOretLet me add to the comments above, they have done several of my pistols with excellent results. One of the things is they drilled a hole in the front of my slides so that a full length recoil spring guide could be installed on my 75B. The spring was a bitch to install as it would kink and twist during the installation after cleaning. Now no problem.
Officers lives matter!
January 26, 2018, 07:13 PM
K.O.A.M.They have done 3 CZ's for me-a P07, a P09, and a pre-B 75. All were completed in promised time and I believe I got excellent value for the money.
What, me worry?