Go | New | Find | Notify | Tools | Reply |
Certified All Positions |
Do you own a P22x series pistol? You need the SRT. I put one in my P225 and now that I've spent some range time it's going to happen in the rest. In fact, I never quite paid mind to how much the reset meant, until now. It's really, really easy to do yourself. As long as you have basic tools. You don't need to send it to SIG or a gunsmith to do, unless you have no experience. I heartily recommend this small modification, the results are well worth it. Arc. ______________________________ "Like a bitter weed, I'm a bad seed"- Johnny Cash "I'm a loner, Dottie. A rebel." - Pee Wee Herman Rode hard, put away wet. RIP JHM "You're a junkyard dog." - Lupe Flores. RIP | ||
|
Go ahead punk, make my day |
I remember 8-ish years when everyone wanted them and they were hard to find as a 'kit' to install yourself. Well worth the search then and now for your DA/SA SIGs. | |||
|
Member |
Sear Creep on my non SRT P239's is 0.018 inch. Sear Creep on my P229 Elite Stainless is 0.070 inch. Since there are times when I like to test myself at 50 YARDS it should be rather obvious I prefer the Non SRT trigger, because it is much better for precision shooting. In fact if I want to shoot with a creepy trigger with a short reset all I have to do is get my SA XDM 40 out of the safe and load it up with 16 rounds per magazine. BTW, doing a mag dump with 16 rounds is a heck of a lot more fun than doing it with only 12. I've stopped counting. | |||
|
Stupid Allergy |
I have an Enhanced Elite P226 coming next week, it’s got the SRT and I’m excited to shoot it. I ordered some hammer springs and a P-SAIT from Gray Guns today. Should be a sweet shooter. "Attack life, it's going to kill you anyway." Steve McQueen... | |||
|
Obviously not a golfer |
Is there an age limit to the pistols on which this can be done? I have a mid-90's P220, and I am definitely interested in shortening the reset. | |||
|
Certified All Positions |
I'll respectfully and vehemently disagree with you on that.
No, not that I am aware of. In fact I used a P220 SRT kit in my P225. Arc. ______________________________ "Like a bitter weed, I'm a bad seed"- Johnny Cash "I'm a loner, Dottie. A rebel." - Pee Wee Herman Rode hard, put away wet. RIP JHM "You're a junkyard dog." - Lupe Flores. RIP | |||
|
Go ahead punk, make my day |
SRT is pretty good, but honestly the QTR is better. I only have one SIG P220 - had the SRT in there (and may other SIG previously), but then I tried the QTR by Gerry Ritacco / Total Automation. Much less creep. It is also installed by http://www.thesigarmorer.com/ | |||
|
Member |
May I ask why? I’m not trolling of looking to start interwebz arguments, but what specifically do you like about it? I have handled P-series guns both with and without it and I remain kind of blah about SIGs SRT. I’m clearly in the minority. Most of the guys I know who have them swear by them. I’ve just never heard them articulate why but for the occasional “it’s faster”. In my experience it ain’t. | |||
|
Member |
Glad it is working out for you. I love the triggers as they are on my German SIGs, P220/P226/P228, and will leave them as is. Shorter reset is not that important to me. | |||
|
Exceptional Circumstances |
I agree. The p-sait in the legion is even better. ------------------------------------------------------------------------------------------ ΜΟΛΩΝ ΛΑΒΕ | |||
|
My other Sig is a Steyr. |
Nope. Have them in most of my P220s from 1977 and up. Works with any caliber too (then you'll want aluminum grips & a solid guide rod to go with it).
I only have one P220 with the 10mm trigger, and it has a Gray Guns trigger in it. The 8mm short reach trigger can be found, but it isn't the most common part ever made. | |||
|
Member |
No you don’t need it. It is nice though. For ME: DA/SA=Sig 9mm or HK P30 LEM 9 Striker fired= Glock 9mm If it's a .45= 1911 Suppressed= HK in .45 I like anything in 10mm | |||
|
Certified All Positions |
Did you actually use the gun with the SRT? Just "handling" it, isn't going to illuminate the difference.
Ok... I don't understand the compulsion to post this sort of thing, honestly. If it's not important to you, why is expressing it?
That's sort of a downer of a thread title, so I went with something with more vim. Sorry to be so controversial. Hey, guys, I've been shooting Sigs for a long time, and this small, inexpensive, drop in modification was a revelation. I can tell you why, because I first learned how to shoot defensively with the P228, from the Sig courses where they teach you to cock the hammer as you draw among other things. For me, the addition of this small change, means the let off on my P225 is now very brief. I'm not big on modifying carry pistols, or mucking with them much at all. This SRT thing isn't even all that new. But frankly, I can't figure out why it's not just standard. It actually made me pay attention to the reset in other pistols when I really hadn't thought about it, and wonder why it's so loooong in Sigs. Trigger pull weight, is trigger pull weight. That's where the bang happens. I'll take a short reset no matter what, if I have a choice. Arc. ______________________________ "Like a bitter weed, I'm a bad seed"- Johnny Cash "I'm a loner, Dottie. A rebel." - Pee Wee Herman Rode hard, put away wet. RIP JHM "You're a junkyard dog." - Lupe Flores. RIP | |||
|
Member |
I've got the SRT in half the Sigs I own. I personally see it as one of the greatest things Sig ever did for those pistols. I realize that there are many that shoot the standard trigger guns just as well but all the excess movement forward to trigger reset seems wasteful to me. It's certainly not consistent with the "economy of motion" concept. It seems to me that the trigger is right there as the sights come up and its faster for me. It's a shorter reset like the Glocks and almost as good as the Third Gen Smiths IMO. | |||
|
Member |
I have a S&W 6906. It HAD the sweetest trigger of any gun I owned. But I really didn't like the gun and wished I could dupicate that trigger on my 239. I then discovered the SRT and installed it on that 239 and presto. My 239 is now THE sweetest gun I own. | |||
|
I made it so far, now I'll go for more |
I shoot revolvers almost as much as autos, so I get no benefit from the SRT. Bob I am no expert, but think I am sometimes. | |||
|
Member |
Huh? | |||
|
Certified All Positions |
I think he's talking about double action. If a Sig is DAO/DAK then the SRT doesn't do anything. Arc. ______________________________ "Like a bitter weed, I'm a bad seed"- Johnny Cash "I'm a loner, Dottie. A rebel." - Pee Wee Herman Rode hard, put away wet. RIP JHM "You're a junkyard dog." - Lupe Flores. RIP | |||
|
I made it so far, now I'll go for more |
Double action revo=full reset stroke. I am used to it. Now, 1911s is a different story. Bob I am no expert, but think I am sometimes. | |||
|
Member |
I just shot my 229 srt a few days ago. It reminded me, of how much better a trigger it is, then ANY striker fired pistol I've shot. | |||
|
Powered by Social Strata | Page 1 2 3 |
Please Wait. Your request is being processed... |