SIGforum
Where to buy Glock 21 slide?

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/9270055944

November 13, 2018, 12:38 AM
matai
Where to buy Glock 21 slide?
Anybody know where I could buy a complete Glock 21 slide?

Thanks
November 13, 2018, 09:02 AM
21brutus
https://www.gunbroker.com/All/...s=glock%2021%20slide

https://www.ebay.com/p/GLOCK-M...Austria-NS/814906780

https://www.glockmeister.com/G...roductinfo/G21UPPER/
November 14, 2018, 11:21 AM
limblessbiff
Are you converting a g20 to g21?
November 14, 2018, 06:40 PM
hrcjon
I've bought many from glockmeister over the years with complete satisfaction. My luck on ebay and gunbroker has not been very good.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
November 14, 2018, 06:41 PM
RHINOWSO
Brownells has OEM Glock slides from time to time as well, I just converted a G23 -> G19 with front serrations.
November 15, 2018, 07:10 PM
Udo
I'm a little confused. I've purchased a good used G21 for little more than those slide prices posted. wouldn't that be an option.
November 15, 2018, 07:22 PM
hrcjon
Its always an option, but one hopes you can find a slide for less than a complete gun if you don't need the reciever. And if you want a new one its more difficult to make the economics work. That's been my experience in the past. But patterns change and pricing changes. Since Glock won't actually sell a slide almost every one of these is gun that was stripped.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
November 16, 2018, 08:47 AM
fullmann
I only gave 3 bones for my complete G21sf.

Unfortunately with the advent of the various 80% lowers... complete uppers are more than a full pistol. Because people will pay it.
November 16, 2018, 11:55 AM
nojoy
https://www.glockstore.com/par...sories/slides?page=2

Of course the other option is buy a used G21. Should be able to find one for less than $400.00
Smile
November 17, 2018, 12:41 PM
trebor44
They are available. Question is what gen? I have a Gen 2 that will fit Gen 2-4 receivers. Another option is to just do a barrel from KKM and get the mag(s) you need.


--------------------------------

On the inside looking out, but not to the west, it's the PRK and its minions!
November 17, 2018, 09:00 PM
fmiq
I have a very nice complete Gen. 3 factory slide, ready to drop on!