SIGforum
Beretta 92 Compact
October 29, 2020, 08:26 PM
bcjwriterBeretta 92 Compact
After years of buying then regretting I’m finally getting some of my older pistols back. One of these is a 92FS compact (no rail) I sold 6+ years ago. Once I’ve got it back I have a couple of questions...
Does Beretta make a D spring for the compact model to improve trigger pull?
Who makes a good, thin line grip for the 92 FS compact?
Any other suggestions will help.
Thsnks!
October 29, 2020, 08:29 PM
cslingerWilson makes great grips.
I also have a set of cool hand thin grips that I like.
I THINK the same D spring is used for compact and full size.
Take Care, Shoot Safe,
Chris
October 29, 2020, 08:49 PM
CQB60VZ Grips make an especially ergonomic grip that thins the grip as needed.
______________________________________________
Life is short. It’s shorter with the wrong gun…
October 29, 2020, 08:55 PM
PhotomanHammer spring is the same for full size and compact.
Langdon has good hammer springs. I use the 13# with reliable results.
https://www.langdontactical.co...-spring-12-13-14-16/Langdon also has nice grips.
+++
October 30, 2020, 12:34 AM
matthew03Wilson or Langdon. Post some pics when you get her right.
October 30, 2020, 08:20 AM
CQB60The 92 compact is a fav of mine. It’s great pistol to work up. I’ve swapped not only the grips, but the hammer with an Elite Skeletal hammer & also replaced the mag release with a Beretta extended one. I too have achieved good results using a 13lb hammer spring & a LTT optimized trigger bar. A little money goes a long way on improving a very good pistol, great. Good luck
______________________________________________
Life is short. It’s shorter with the wrong gun…
October 30, 2020, 01:16 PM
Delta-3quote:
The 92 compact is a fav of mine.
Mine as well. It's one of my EDC pistols. I had mine sent to WC for a complete upgrade. 12# spring has been reliable. Among other things, they tuned the trigger down to 6.5 lbs DA & 3.5 lbs SA. G kit...the works. Plus Mec-Gar makes 15 rd mags for it. Worth every penny!
Rom 13:4 If you do evil, be afraid. For he does not bear the sword in vain. For he is God's minister, an avenger to execute wrath on him who practices evil.
November 02, 2020, 07:22 PM
Vero8I have the railed inox and love it it is in my fall and winter edc rotation.
God bless America...and no one else
November 03, 2020, 05:37 PM
terra
Love the 92 compact. I changed mine slightly with the Langdon thin grips, wilson mag release, G conversion and main spring swap. Here it is (albeit in a crappy picture) next to two of it's older siblings.
November 04, 2020, 07:21 AM
golddotLangdon, WC and LOK grips all work, as far as the drop in D spring, U may want to check in at Beretta forums, great place. I have the wilson combat as well as a new 96a1, i am about to send to allegheny arms for a complete makeover
thanks, shawn
Semper Fi,
---->>> EXCUSE TYPOS<<<---
November 04, 2020, 09:34 AM
iron chefquote:
Originally posted by CQB60:
The 92 compact is a fav of mine. It’s great pistol to work up. I’ve swapped not only the grips, but the hammer with an Elite Skeletal hammer & also replaced the mag release with a Beretta extended one. I too have achieved good results using a 13lb hammer spring & a LTT optimized trigger bar. A little money goes a long way on improving a very good pistol, great. Good luck
This^^^
Get the Langdon Trigger Job in a Bag. Expensive but worth it.
https://www.langdontactical.co...bag-92-96-m9-series/