SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Beretta 84 and the like
Go
New
Find
Notify
Tools
Reply
  
Beretta 84 and the like Login/Join 
Member
Picture of Kampfhamster
posted
After I got a Beretta 71 and a Glock 42 a few years back the Beretta's in .380 got into my vision.

Anyone has any experience with them? Over here in Switzerland they are quite cheap, but I don't want to buy an old gun that doesn't run reliably.

What's your experience with them?


The citizen watches the watchman, not the taxpayer.
 
Posts: 771 | Location: Switzerland | Registered: September 22, 2002Reply With QuoteReport This Post
Member
Picture of SiGagain
posted Hide Post
I bought a Beretta 84BB when I first go on the job for my off duty pistol...mine was very reliable and I felt good about the payload (at least the amount of bullets) it carried...

my younger brother wants one since our other brother and I brought him into the firearm world and he has been trying to decide between the Beretta 84F, 85F or an 80X as his first ever firearm at 55 years of age...

good luck with your choice...I see no reason but for caliber maybe to not buy one today

Bill


Fast is Fine...Accuracy is Final
*SiGARMS GSR Revolution STX
*SiG/Sauer*P220*P226*P228*P230*P245*SPC2009*P365

NRA Benefactor Life/LEAA Life Membership
 
Posts: 2418 | Location: ChicagoLand, USA | Registered: November 28, 2006Reply With QuoteReport This Post
Prepared for the Worst, Providing the Best
Picture of 92fstech
posted Hide Post
I have an 81 in .32 ACP and a spare .380 barrel for it so I can make it an "84" and shoot both calibers.

It has been very reliable in both calibers. It has a typical long Beretta trigger and a pretty long reset. It's a beautiful gun with a very smooth action, and a great choice for recoil sensitive shooters, especially in .32. .380 is a bit snappy since it's a blowback design, but it's big and offers a lot to hold onto, so it's not bad.

Personally, I'll never carry it or use it for defensive purposes. I don't have a real practical use for a .32 or a .380 in that form factor, but it's fun on the range. I think it would be amazing if Beretta would redesign the Cheetah to make it locked-breech and chamber it in 9mm. A DA/SA 9mm in that size would be amazing. I'd also like it if they'd start importing the 87 in .22LR again, or make an 80X version of it domestically.
 
Posts: 9460 | Location: In the Cornfields | Registered: May 25, 2006Reply With QuoteReport This Post
Member
posted Hide Post
I'm very familiar with them. I have a pair of 84's, an 80x, 2 87's in 22LR, and an 81 in 32ACP that was Italian prison service issue, which I think is pretty cool. I really like the weapon, and have been looking for an affordable model 86 for years, as they were discontinued years ago. I did find a Girsan (Turkish made) version that is a cross between the Model 84 and the 86, it has a 13 round capacity and a tip up barrel.
 
Posts: 17297 | Location: Lexington, KY | Registered: October 15, 2006Reply With QuoteReport This Post
For real?
Picture of Chowser
posted Hide Post
I bought an old 84F and 85F over ten years ago and they still work great. Thinking about a new 80X.

Anyone suppress these in .380?



Not minority enough!
 
Posts: 8219 | Location: Cleveland, OH | Registered: August 09, 2007Reply With QuoteReport This Post
Member
Picture of Kampfhamster
posted Hide Post
quote:
Originally posted by Chowser:
I bought an old 84F and 85F over ten years ago and they still work great. Thinking about a new 80X.

Anyone suppress these in .380?


putting a can on it would be my choice. Recently saw a used 84F with a threaded barrel.


The citizen watches the watchman, not the taxpayer.
 
Posts: 771 | Location: Switzerland | Registered: September 22, 2002Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
Kind of its own sub-category, but I had a Model 86, the 8-round magazine, tip-up barrel version. 100% reliable (although with just a couple of boxes), despite this model not having an extractor. Beautiful fit & finish.
 
Posts: 28949 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Member
posted Hide Post
The are beautifully made, and function extremely well.

The only real disadvantage is their size, which is large for a .380 or .32.

When they started flooding the US market with surplus 80-series several years ago, I picked up several of them in both calibers for peanuts. Both the base model and the BB.

This is one of my favorites. It's a total mutt. Started as an abused 81 base model (in 32). I replaced the slide and barrel with a parts kit from an 84 (in 380), had the frame hard chromed, installed some extra-power recoil springs, and refinished the old/abused/gouged grips myself.

It's a great shooter and just happens to have the best trigger break on any 80-series that I've encountered.



 
Posts: 488 | Registered: February 15, 2004Reply With QuoteReport This Post
Member
posted Hide Post
The Beretta 84 I had in the late 80s and early 90s grouped as well as most 9mm duty weapons at 25 yards and was the only .380 that ran 100 percent that I've owned. I regret selling it. It is large and solid, certainly not a typical blow-back operated pocket pistol like a Walther PP. That's why it shot and functioned so well. The 85 is trimmer since it has the single-column magazine.

I see some of the European police trade-ins here in the states. I'm somewhat tempted to get one again if the price is right.
 
Posts: 43 | Location: eastern Kansas | Registered: April 21, 2018Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
With a slide-mounted (and I presume decocking) safety, they were sold under the Browning name. The model designation escapes me at the moment. I want to think it was BDA.

Practically and objectively speaking, I had little "use" for my Beretta. It was a 9-shot .380 almost identical in size to the 16-shot (11 at the time) 9mm Luger Glock 19. But guess which one I took out of the safe to admire.
 
Posts: 28949 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Member
Picture of RichardC
posted Hide Post
Aimsurplus still has some police trade-ins available.


____________________



 
Posts: 16276 | Location: Florida | Registered: June 23, 2003Reply With QuoteReport This Post
Member
posted Hide Post
I am unsure how well a can would work on a centerfire blowback.
 
Posts: 17297 | Location: Lexington, KY | Registered: October 15, 2006Reply With QuoteReport This Post
For real?
Picture of Chowser
posted Hide Post
quote:
Originally posted by Fredward:
I am unsure how well a can would work on a centerfire blowback.


That's what I was worried about. I see the new 80x comes in a threaded barrel version



Not minority enough!
 
Posts: 8219 | Location: Cleveland, OH | Registered: August 09, 2007Reply With QuoteReport This Post
Baroque Bloke
Picture of Pipe Smoker
posted Hide Post
quote:
Originally posted by Fredward:
I am unsure how well a can would work on a centerfire blowback.

Since the barrel of a blow-back pistol is fixed to the frame I think it would work fine. No disadvantage at all – possibly even better. I’ve never tried it though – just a guess from this old engineer.



Serious about crackers
 
Posts: 9618 | Location: San Diego | Registered: July 26, 2014Reply With QuoteReport This Post
Member
posted Hide Post
Hmm. Looking thru the safe, I find both an 80x and a 9mm suppressor. When my upcoming surgery is done, I'll head to the range and check it out. I often find myself missing the obvious.
 
Posts: 17297 | Location: Lexington, KY | Registered: October 15, 2006Reply With QuoteReport This Post
Member
Picture of Kampfhamster
posted Hide Post
Can on a Beretta 84 sounds interesting. It's actually something that I have in mind. Just have to gather some funds to get this project through.


The citizen watches the watchman, not the taxpayer.
 
Posts: 771 | Location: Switzerland | Registered: September 22, 2002Reply With QuoteReport This Post
Slayer of Agapanthus


posted Hide Post
Did you buy it?


"It is only with the heart that one can see rightly; what is essential is invisible to the eye". The Little Prince, Antoine de Saint-Exupery, pilot and author, lost on mission, July 1944, Med Theatre.
 
Posts: 6025 | Location: Central Texas | Registered: September 14, 2003Reply With QuoteReport This Post
Member
Picture of Kampfhamster
posted Hide Post
Not yet. The gunshop that has the best selection of Beretta's is quite a bit of a drive away and I'm always busy on the weekends.

I guess it'll be next month or so.


The citizen watches the watchman, not the taxpayer.
 
Posts: 771 | Location: Switzerland | Registered: September 22, 2002Reply With QuoteReport This Post
non ducor, duco
Picture of Nickelsig229
posted Hide Post
It's beautiful. If it is what you want go for it. You wont regret it.


Buttttttt, as mentioned earlier, it is extremely oversized for modern .380.




First In Last Out
 
Posts: 4917 | Location: CT | Registered: October 15, 2002Reply With QuoteReport This Post
Member
Picture of Kampfhamster
posted Hide Post
size is not that important, it's not like I get to carry it every day concealed.


The citizen watches the watchman, not the taxpayer.
 
Posts: 771 | Location: Switzerland | Registered: September 22, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Beretta 84 and the like

© SIGforum 2024