I was hoping the awesome brain trust here can explain something for me. I just got a P320 X5 and when you press check it the slide does not go fully into battery. An internet video review ( I know, I know!) stated that this was a “feature” that enhances accuracy. They state the slide is “ pretensioned “ I had never heard that one before, so I was hoping some one here may have more details. Thank you !
"Think about how stupid the average person is, and then realize half of them are stupider than that' George Carlin
Posts: 504 | Location: St Louis | Registered: June 23, 2014
I have never heard the term "pretensioned" applied to SIGs, but when I buy a SIG I always hope there is a little hesitation as the barre/slide/frame lock up tightly into battery. This was common on German SIGs. Not so common now on most American guns with their more "relaxed" fit....
NRA Life
Posts: 1586 | Location: Under the Tonto Rim | Registered: August 18, 2003
Originally posted by rock185: I have never heard the term "pretensioned" applied to SIGs, but when I buy a SIG I always hope there is a little hesitation as the barre/slide/frame lock up tightly into battery. This was common on German SIGs. Not so common now on most American guns with their more "relaxed" fit....
Originally posted by dgrdvm: I was hoping the awesome brain trust here can explain something for me. I just got a P320 X5 and when you press check it the slide does not go fully into battery. An internet video review ( I know, I know!) stated that this was a “feature” that enhances accuracy. They state the slide is “ pretensioned “ I had never heard that one before, so I was hoping some one here may have more details. Thank you !
After press checking press the back of the slide with your thumb
I have 2 x5's, both with over 2k rounds through them and they still don't fully return to battery if you press check (which I don't) or slowly release the slide. However, they both always return to battery when shooting. They are uspsa guns and they are awesome. Initially that concerned me that it might fire out of battery but no issues at all. I have also changed out the recoil assembly and it is slightly better, but will still stay out of battery with a press check or slowly releasing the slide. I spoke with Yong Lee about it and he said it's no big deal so I trust him and like I said, zero issues when shooting. They are very tight and oversprung so I think you should use some strong ammo initially.
p229Extreme/P226Tac-Ops/P226 Extreme/P226 SAO) P226 X-5 Blue Moon/P226 X-5 Black and White
Well, pretensioned sounds like a phrase equating to having a more precisely fit barrel/ slide/frame. If so, I'm all for it. This is the kind of fit that people have paid gunsmiths good money to achieve. It is often mentioned when discussing Les Baer guns, bulls Eye guns, etc. and is sometimes referred to as a "hard fit". In the actual hard fit guns, there is no play or looseness at all in battery, as if the barrel/slide/frame becomes one piece of steel when locked into battery.
I have read of people that do not understand this, complaining on enthusiast forums, or actually sending their guns back to the manufacturer because of this, even though they report no functional problems. Guess I better get to complaining about the Baers I have owned, Hardball Colt, SIG P210s, German manufactured SIGs, S&W Performance Center guns, etcThis message has been edited. Last edited by: rock185,
NRA Life
Posts: 1586 | Location: Under the Tonto Rim | Registered: August 18, 2003
Originally posted by rock185: I have never heard the term "pretensioned" applied to SIGs, but when I buy a SIG I always hope there is a little hesitation as the barre/slide/frame lock up tightly into battery. This was common on German SIGs. Not so common now on most American guns with their more "relaxed" fit....
Interesting the description from the link states "Pre-Tensioned slide/barrel variant. Barrel is fit specific to pistol. Not interchangeable with standard factory barrels.". I have never heard of this until now. And I don't think TGS is into BSing it's customers.
Posts: 875 | Location: South Dakota | Registered: May 21, 2013
Pretensioned... When your loyal customers have been lead to believe that high quality precision firearms are supposed to rattle like an old tool box, when you do make one a little tighter, you have to come up with a new name for it so they don't get worried something's wrong.
In this case apparently, that did not work.
_____________________________________________________ Sliced bread, the greatest thing since the 1911.
I was having a conversation recently elsewhere about barrel to slide fit with the X-VTAC and a "normal" P320 barrel, so I wonder if this is related.
I was looking around for a threaded barrel for my X-VTAC. The only one that I could find is made by Silencerco for the "normal" fullsize P320.
Another guy said that he bought one for his VTAC and that it wouldn't fit because the chamber block (or whatever the correct term is for the square bit at the end of the barre which contains the chamber) on the SilencerCo one is ever so slightly larger than the chamber block on the VTAC barrel. He took calipers to it, and he said that the VTAC chamber measured 10mm, while the SilencerCo one was 10.27mm. Thus the SilencerCo barrel wouldn't go in to battery properly in the VTAC slide.
Anyone else have thoughts on this? Anyone else with a set of calipers and a standard P320 barrel available to compare to an X-series one?
Posts: 1501 | Location: Baltimore, MD, USA | Registered: December 06, 1999