I'm looking to replace the "dovetail protectors" in the slide of my 10mm Glock 20. I prefer Warren Tactical Sevigny sights on my other Glocks. They don't seem to be available for the big Glocks.
Anything similar out there? What do you like?
If I can't find anything else, I will send it in to the factory and have a set of factory night sights installed.
BruceThis message has been edited. Last edited by: RNshooter,
"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams
“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free." -Niccolo Machiavelli
The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
June 28, 2019, 05:24 AM
GCE61
Check Trijicon HD-XR, I have them on my Glocks, check the website to see if they have proper heights for the g20.
Also Dawson Precision has a variety of sights, with a range of front height blades to dial in your POI
June 28, 2019, 05:27 AM
dc54
I have Ameriglo sights in mine.
Sigs, HKs, 1911s, Berettas, Glocks and SW revolvers
June 28, 2019, 05:28 AM
limblessbiff
Check out ameriglo, I have their version of the trijicon hd on my g20. Best part is that they use trijicon tritium vials abs cost half as much.
June 28, 2019, 06:40 AM
hudr
I’ve put XS Big (or standard ) Dots on most of my GLOCKS, large and small frame. I’ve always preferred more of a bar/dot (Von Stavenhagen) style sight. I have Big Dot sights on a G20 and can keep shots inside a paper pie plate at 25 yards. That’s pretty good for me. The large V in the rear sight makes them fast to pick up, and as my eyes age the dot stays easy to find up front. Tritium front and rear makes the pistol easy to find on the nightstand.
June 28, 2019, 08:07 AM
limblessbiff
I should also add that the sights for a .45 Glocks are the same for 10mm. Some manufacturers neglect to advertise them for both calibers
June 28, 2019, 08:22 AM
US_P225
Have you looked at Dawson Precision's sights? I have their adjustable set on my 20 and am about to put them on my 21, as well. I'm partial to adjustable, but they have a bigger selection in their fixed sights and they look similar to the Warren Tactical ones you mentioned.
I have Trijicon HD XR sights on all my Glocks (in fact many of my pistols), including the 10mm's up through the G40.
I just put a set on a G43X yesterday. The sights are available for just about everything.
June 28, 2019, 12:03 PM
gibby29
I just got some Ameriglo Agent sights for my 48. They make those for large frames also.
I also have Ameriglo or Trijicon 3 dot nights on my G40 MOS.
June 28, 2019, 12:16 PM
Black Pepper
You can also look at NIGHT FISION sights as they have some good options as well. I have them on my CZ P-10C and Glock 43 and like them enough that I will put them on all my guns that they make them for
Edit: Plus, Dave Sevigny will install them for you, himself. Kind of outing myself as a fanboy, but, for a Glock shooter, it's the equivalent of having the Pope bless the cross you wear every day
"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams
“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free." -Niccolo Machiavelli
The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
June 28, 2019, 09:48 PM
sns3guppy
quote:
Originally posted by Anubismp:
If you do send your slide in to Glock for factory sights make sure you strip out the internals so you get spare parts.
Edit: Plus, Dave Sevigny will install them for you, himself. Kind of outing myself as a fanboy, but, for a Glock shooter, it's the equivalent of having the Pope bless the cross you wear every day
Glad you found what you were looking for. I was going to suggest Lone Wolf. They I believe have the sights you were looking for.
