SIGforum
New GGI Flat Trigger for classic P-Series

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/7820034324

May 06, 2017, 04:02 PM
Dusty78
New GGI Flat Trigger for classic P-Series
Took the my M11-A1 with the new GGI DA/SA flat trigger and me likey!

My 10 yard target, 50 rounds of Federal 115gr unsupported. I feel the trigger design gives me better control. I will likely order a couple more. Home run GGI




_______________________________________________
Use thumb-size bullets to create fist-size holes.
May 06, 2017, 07:13 PM
jljones
I like it



www.opspectraining.com

"It's a bold strategy, Cotton. Let's see if it works out for them"



May 17, 2017, 08:01 AM
steve495
Grayguns now has these triggers available online at the Grayguns website - https://grayguns.com/product/p...le-straight-trigger/

Video introduction...




Steve

Small Business Website Design & Maintenance - https://spidercreations.net | OpSpec Training - https://opspectraining.com | Grayguns - https://grayguns.com

Evil exists. You can not negotiate with, bribe or placate evil. You're not going to be able to have it sit down with Dr. Phil for an anger management session either.
May 17, 2017, 10:06 AM
barndg00
Can you talk a bit about the aluminum vs steel versions? Why have both and are there benefits to either over the other?
May 17, 2017, 11:45 AM
steve495
quote:
Originally posted by barndg00:
Can you talk a bit about the aluminum vs steel versions? Why have both and are there benefits to either over the other?


Why not? During the testing, the Aluminum has been holding up just as well as the alloy steel version. Bruce was pretty confident with the material choice. It is less expensive for the material and machining, so that's another reason. (Options are good.)

Also, Aluminum allows for different colors in the future, and you may or not be surprised at how many folks ask about colors.


Steve

Small Business Website Design & Maintenance - https://spidercreations.net | OpSpec Training - https://opspectraining.com | Grayguns - https://grayguns.com

Evil exists. You can not negotiate with, bribe or placate evil. You're not going to be able to have it sit down with Dr. Phil for an anger management session either.
March 15, 2018, 06:39 PM
10x Sniper
I wonder if these will work on older p220's...


________________________
"The Revolver -A more elegant weapon from a more civilized age."
March 15, 2018, 06:47 PM
.38supersig
quote:
Originally posted by 10x Sniper:
I wonder if these will work on older p220's...


It should as long as they don't have the 8mm wide trigger, then your options are somewhat limited.

I only have one P220 (not counting X-Series) that has the wider trigger. It has a GG trigger in it. Actually I put the trigger in the Sig before any rounds were fired.



March 16, 2018, 07:09 PM
c1steve
I just put the P320 straight faced trigger on a P320, and was exceedingly impressed. I went straight to the range, and the RO was commenting on the very tight groups.


-c1steve
March 17, 2018, 12:42 AM
10x Sniper
Can this work on a dak 220?


________________________
"The Revolver -A more elegant weapon from a more civilized age."
March 17, 2018, 12:37 PM
FlaSigUser
Bruce,
Any idea if a flat trigger will be available for the SAO P220 and P226 ?
All my DA/SA p220's, P226, and P229's are sporting the flat triggers. Love them.
March 17, 2018, 04:56 PM
bare bones
Just installed Grayguns RED trigger on my 229 elite and it turned out that it was adjusted out of the box for my requirements. Great cold weather allowances and superb short reset on 2d shot.


"Only the Dead Have Seen an End to War" Plato.