SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    What are my options for a clock 20, 22lb recoil spring?
Go
New
Find
Notify
Tools
Reply
  
What are my options for a clock 20, 22lb recoil spring? Login/Join 
Member
posted
Hello,

I have a few g20 pistols and Im messing around with one right now, I want to get a 22lb recoil spring in it because I have been shooting a fair bit of heavier weight ammo through it, its a woods carry gun for me and I've been hearing lots of people talk about getting a beefed up recoil spring. The gun in question is a gen4.

Thank you!!!
 
Posts: 5083 | Location: Alaska | Registered: June 12, 2010Reply With QuoteReport This Post
Member
posted Hide Post
https://www.glockmeister.com/F...GLOCKs/products/484/

https://www.glockmeister.com/H...roductinfo/HRSPRKIT/

https://www.glockmeister.com/G...ctinfo/GMSSR20C%2D2/

I was just looking at a G40 MOS; it's used, but one can't tell. It doesn't come with the factory barrel, but a rifled aftermarket barrel, otherwise stock with no obvious wear. I don't plan to use the MOS, but a 6" bbl with buffalo bore 10mm would be a nice choice for some applications.

650 sounds high; I suppose it's not so bad for a G40MOS, but if one isn't using the optic feature, and it doesn't have the factory barrel...seems high.

The Glockmeister rods above allow the use of different springs.
 
Posts: 6650 | Registered: September 13, 2006Reply With QuoteReport This Post
Member
posted Hide Post
I bought both 22 and 24 pound non-captive recoil springs from Wolff, (gunsprings.com) The 24 pound works well with Underwood 180 and 200 gr. bullets.
 
Posts: 35 | Registered: October 12, 2017Reply With QuoteReport This Post
Member
posted Hide Post
Are you running those in an aftermarket barrel?
 
Posts: 6650 | Registered: September 13, 2006Reply With QuoteReport This Post
Member
posted Hide Post
Did you need to get a gen4 adapter or are you shooting a gen3?
 
Posts: 5083 | Location: Alaska | Registered: June 12, 2010Reply With QuoteReport This Post
My other Sig
is a Steyr.
Picture of .38supersig
posted Hide Post
Yup, you will need an adapter. I had a Glock 20 and found a 40 MOS slide for cheap. Used it so much, I sold the 20 upper and don't miss it at all.



 
Posts: 9477 | Location: Somewhere looking for ammo that nobody has at a place I haven't been to for a pistol I couldn't live without... | Registered: December 02, 2014Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    What are my options for a clock 20, 22lb recoil spring?

© SIGforum 2024