February 20, 2021, 07:52 PM
techguyKel-tec PMR 30
Any of you folks have the Kel-tec PMR 30? You have any issues with it? Thank you.
February 20, 2021, 09:48 PM
64dodgeI've had one for a while. It has approximately 250 rounds thru it. No issues whatsoever. Fun to shoot. The muzzle flash is pretty impressive.
February 20, 2021, 11:24 PM
FlyingScotNo issues, shoot it surprisingly well as does the family. About 6 months ago did the MCARBO work on trigger, added (and polished) stainless feedramp, mag release, heavier recoil spring (a bit fiddly) ...
Was good before - really really good now. The sights with fiber optics work pretty good. I and family are fans of this, luckily have a good stock of .22WMR.
“Forigive your enemy, but remember the bastard’s name.”
-Scottish proverb February 23, 2021, 07:00 PM
sigNullI have both a PMR-30 and CMR-30, both are a hoot to shoot!
You knew the job was dangerous when you took it, Fred! - Henry Cabot Henhouse III, aka "SuperChicken"
February 23, 2021, 10:14 PM
sigspecopsNo issues and its super fun to shoot. It throws out a foot of flame and sounds like a .357 magnum. The magazines are a pain to load though.
No one's life, liberty or property is safe while the legislature is in session.- Mark Twain
February 24, 2021, 07:48 AM
Flash-LBMrs. Flash has one and it's become her favorite pistol. She loves the loud report and the huge muzzle flashes.
As I told her, if 30 rounds to center mass don't stop an assailant, the muzzle flash will set them on fire.
February 24, 2021, 10:40 AM
HRKHave one, bought it used, the PMR30 has reports for a lot of FTF however its not the gun, it's how the mag is loaded. Load it wrong and you'll get problems.
First Mag I loaded and shot had issues of FTF. Reloaded that mag, and then took it to the range with zero issues, and I've shot it many times since. Loading the Mag properly is important.
Fun gun 22 WMR 30 rounds, have 3 mags ready, sights are good, trigger is fine out of the box, wish it had a provision for an optic...
February 24, 2021, 10:51 AM
Flash-LBquote:
Originally posted by HRK:
Fun gun 22 WMR 30 rounds, have 3 mags ready, sights are good, trigger is fine out of the box, wish it had a provision for an optic...
It does.
https://www.keltecweapons.com/...pmr30-red-dot-mount/February 24, 2021, 11:00 AM
HRKquote:
Originally posted by Flash-LB:
quote:
Originally posted by HRK:
Fun gun 22 WMR 30 rounds, have 3 mags ready, sights are good, trigger is fine out of the box, wish it had a provision for an optic...
It does.
https://www.keltecweapons.com/...pmr30-red-dot-mount/
Welll slap my ass and call me Sally.....
February 24, 2021, 11:08 AM
FlyingScotFor the PMR30, Highly recommend the MCARBO upgrades. The polished stainless feedramp, adjustable trigger, recoil spring, and mag release update. Stronger recoil spring helps with consistent feeding (and optic addition) as does the feedramp and the release helps raise the magazine just a bit which also helps with feeding.
Warning - if doing the recoil spring upgrade you need three hands and suggest you get spare keepers as you will launch 1 or 2 - do the work in a box so if comes off stays contained. Basic gunsmith skills, nothing too hard.
“Forigive your enemy, but remember the bastard’s name.”
-Scottish proverb February 25, 2021, 09:05 AM
V-Tailquote:
Originally posted by sigspecops:
The magazines are a pain to load
https://gregcotellc.com/cart/m...tjikr72dtvaouamucgi6
הרחפת שלי מלאה בצלופחים February 25, 2021, 04:17 PM
HRKor this is the one I got, works good, you better have strong fingers to hand load these things.
https://www.amazon.com/PMR-30-...Loader/dp/B086CCHX5HFebruary 25, 2021, 04:54 PM
Flash-LBI've got a PMR30 magazine loader that was made on a 3D printer and a friend gave it to me.
Works great and no pain on the thumbs.