Go | New | Find | Notify | Tools | Reply |
Member |
Just picked up this beauty in trade! No box though. It’s definitely DAO, how can I tell if it’s a DAK? Also, does the inclusion of the E2 grip make this an E2 model? This message has been edited. Last edited by: kframe357, | ||
|
Oriental Redneck |
Based on that hammer, it's a DAK. The E2 refers to the grip. It might or might not have been original with the gun, as it came from the factory. The gun could have been a DA/SA, with stock plastic grips originally, that previous owner swapped stuff around to what you have now. So, to answer your second question, there was no original P226 E2 model that was a DAK with the E2 grip. Not that I'm aware of. Q | |||
|
Security Sage |
It’s very likely a LEO trade in. Should be a great shooter if already broken in. RB Cancer fighter (Non-Hodgkins Lymphoma) since 2009, now fighting Diffuse Large B-Cell Lymphoma. | |||
|
Member |
Thank you! It has a remarkably nice trigger pull. | |||
|
Member |
It hasn’t been shot much, the pic looks worse than it is, shiny spots are oil. I’m actually, more than likely, going to use it as my sidearm for work (LEO). | |||
|
Member |
You may want to pick up a parts kit and replace all the springs. Cheap insurance for any used gun. <><><><><><><><><><><><><> "I drank what?" - Socrates | |||
|
Member |
Excellent gun. Most are in .40 so finding one in 9mm is a bonus. The DAO guns have a "normal" looking hammer. +++ | |||
|
That rug really tied the room together. |
Fantastic night stand gun. ______________________________________________________ Often times a very small man can cast a very large shadow | |||
|
Member |
If the reset is heavier then letting the trigger all the way out then it's dak. I have a 40 cal dak and really like it. DPR | |||
|
Freethinker |
There’s no need to even touch the gun to know that it has a DAK trigger. The DAK hammer is unique to those models. Left to right: Standard DA/SA hammer “Sport” DA/SA hammer Double action only hammer with spur Double action only “bobbed” hammer DAK hammer “I can’t give you brains, but I can give you a diploma.” — The Wizard of Oz This life is a drill. It is only a drill. If it had been a real life, you would have been given instructions about where to go and what to do. | |||
|
Member |
Thanks! Definitely a DAK. | |||
|
Oriental Redneck |
^^^ Well, I could have told you that. Oh wait, I did. Q | |||
|
Member |
Yes you did. The picture just confirmed what I was told by you. It’s just nice getting a second confirmation. | |||
|
Member |
I'm by no means an expert... but since there is no decock lever or safety on the gun.....it would seem that it is a double action only. My Native American Name: "Runs with Scissors" | |||
|
Security Sage |
Same setup for DAK. "Double Action Kellerman" RB Cancer fighter (Non-Hodgkins Lymphoma) since 2009, now fighting Diffuse Large B-Cell Lymphoma. | |||
|
Member |
No wear marks on the frame from where the de cocking lever would be. Most likely started life as a DAK. ENJOY IT! I love my P226 DAK! Si vis pacem, para bellum | |||
|
Oriental Redneck |
Good observation. And, previous owner simply put the E2 grip on. Q | |||
|
Member |
Great point about wear. I’m glad they did, the grip is very comfy. | |||
|
Member |
I have a 229 DAK in 9mm was a fact ICE gun , the trigger is almost like a D/A Smith , mine was a Gov over run with standard grips | |||
|
Member |
You have acquired a gem of a handgun. I have the same handgun, which came to me in .40 S&W, with regular grips and the older mainspring, at a price which was close to unbelievable (my LGS agreed). Only wear was some slight due to the holster. Since I do not believe the .40 suddenly became an anemic mousegun simply because the sainted FBI has now re-anointed the 9 mm, I left the chambering untouched. Picked up a spring kit from Brownells and replaced the springs, including a kit for those on the accompanying magazines, which were also cleaned and lubed; cheap insurance indeed! Also upgraded the mainspring to the newer one, and used a Wolff spring calibration kit to determine that a 19# mainspring was ample (the 17# and 18# were faultless in testing, so I erred on the side of caution). The factory 24# mainspring was simply unnecessary. It proved a nice touch, along with greasing the length of the mainspring guide and upper end with Brownells' Action Magic. All-in-all, the handgun was very clean and appeared to have been regularly serviced by an armorer. Nonetheless, I did a two-step cleaning while avoiding a complete breakdown, which seemed overkill. Sprayed all internals of the action several times first with Hoppe's No. 9, then worked the action a few dozen times, then letting it sit overnight and working it again. Sprayed clean with non-chlorinated brake cleaner. This flushed tiny bits of carbon out. Repeated with Ballistol, including the overnight soak, then liberal sprays of brake cleaner. Finally lubed with light coat of Hoppe's best synthetic spray gun oil, draining or wiping away excess, and also oiled or greased other areas such as the slide rails as needed. The bore was cleaned of all fouling. Only a touch of copper was detected. A quick scrub with J-B Bore Cleaner removed that. While I was at it, I polished the feed ramp and entire area of the barrel breech by hand with Flitz polish on a patch, and wiped totally clean. Finally slipped on E2 grips. All of the firearms functions were then checked and verified with dummy rounds (ejection, failure to fire if out of battery, etc.) before firing. What a change! From very good, to great. The DAK trigger is . . . . . like that of a well-tuned S&W K-Frame. Just sweet. The gun has been 100% in every way. It is now paired with 155-grain HP ammunition. Is quick to get back on target for follow up shots. It may or may not be superior to the best 9 mm, but surely it is not inferior! While I am jealous of your ideal 9 mm prize, these DAK gems are great in any chambering! Great catch! Good shooting! Brian | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |