Anybody know who might have grips for the P210 Carry? I checked some of the usual suspects and found none. There are some nice wood grips out there for the P210A but evidently they will not fit the Carry model.

Edited due to bad info I don’t wanna spread.

This message has been edited. Last edited by: OttoSig,

Actually Poppy is correct.

I have a P210A and a P210 carry.

The factory wood grips from my P210A (made by Hogue by the way) won't fit the P210 carry.

Also, Grayguns mentions on their website their custom logo hogue G10s fit the P210A but not the P210 Carry.

I’ve got some bad info then, I gotta look into that!

Those Grayguns G10 grips for the P210A Standard and Target are great. I like a thinner grip similar to a 1911 and those fit my hand well.

Which leaves the Carry model the odd man out. The factory grips are functional but ugly.

I love the Hogue wood checkered grips for the 210A.

My baby needs new shoes!

Might want to give Hogue a nudge. I recommend contacting Ken directly.

quote:

Those Grayguns G10 grips for the P210A Standard and Target are great.

Agreed. I have a set on my P210A. Hogue manufacturers the standard Carry grips but the Grayguns ones by Hogue are much nicer.

Anyone come across custom grips for the P210 Carry?

I gave in and purchased this pistol but don't really care for how thin the factory grips are. Thinking about hiring a custom grip maker to duplicate the grips, only make them 50% wider with a slight palm swell (into the palm, not towards the wrist when holding the pistol... the latter of which I've felt/seen on many older model P210's and didn't feel right).

just to be clear. Hogue production G10 will fit the Carry.

The wood grips at this time do not BUT..... working on the modification. Will advise once complete.

Yep, understood - thx again Ken.

Because the new Carry model is meant to do just that, my super-duper wish is for an enterprise to make (non-target) wood grips that extend below the frame (same as the original factory grips), thus providing a magwell of sorts. Slightly wider than the original Carry grips of course

OK. We/I finial have the production engineer on board and in about 2-3 weeks I should have the first articles’ of the REV C (I think this will be the Rev but will confirm then) wood grip that will fit both frames moving forward. With that said, any current inventory will also be modified. If there is any product out in the field that may need to be modified we will do that also. Nothing can be done until the first articles’ have past muster.

I will update you as update come through and post pictures of the finial Rev #

Again, I am hoping this can happen in the next 2-3 weeks. Time will tell but if you have question, or want updates, let me know and I will fill you in.

That's great Ken & thanks! Your response goes to show why Hogue remains my first-stop shop on the Internet when it comes to firearms & knife-related accessories.

quote:

Originally posted by Ken @ Hogue Inc:
OK. We/I finial have the production engineer on board and in about 2-3 weeks I should have the first articles’ of the REV C (I think this will be the Rev but will confirm then) wood grip that will fit both frames moving forward. With that said, any current inventory will also be modified. If there is any product out in the field that may need to be modified we will do that also. Nothing can be done until the first articles’ have past muster.

I will update you as update come through and post pictures of the finial Rev #

Again, I am hoping this can happen in the next 2-3 weeks. Time will tell but if you have question, or want updates, let me know and I will fill you in.

Hi Ken,

I’m the guy that discovered that the Grayguns grips will not fit the Carry, is it going to be possible to modify those grips to fit my carry?

quote:

Originally posted by Voyagertwelve:
..., is it going to be possible to modify those grips to fit my carry?

You Got Mail.

its about time......

Finally, wood grips for the American P210 steel and Aluminum frames
We tried to make 1 grip to fit both the steel and the American Aluminum frame guns BUT we found that we couldn't do that SO, here is the grip back from range testing.
Held up to the test.





Part numbers have been made and getting updated on the Web this week.

ALL the same modification done on the Aluminum frame P210 grips also. Again, each wood grip will only fit the Steel or Aluminum frame pistols so be careful when ordering. Wood grips at this time are flush to the bottom of the frame.

Again, give us a day or two for marketing to get the web updated with both steel frame grip PN's and Aluminum frame PN's. Exterior of the grips posted look the same, the difference is on the inside.

Any questions, hit me and I will get you the answer you need

This message has been edited. Last edited by: Ken @ Hogue Inc,

Online Hogue has quite a selection of grips for "P210 American." Pictures seem not to show the Carry P210. Words provided seem not to make a distinction between steel and aluminum frames. I might not have looked in the right place.