I though the most effective advertisement for the P320 line was the whole “This is my P320” ad. The ability to adapt, or customize it to you really does set it apart (that’s coming from a Glock guy mind you...)


Do for this thread...show off “your” P320.

Duty (Compact slide with X-Carry grip and TLR-1HL):


Concealed duty/off duty (Compact slide with X-Compact grip):


Just a grip swap to go from one to the other, and I only have to qualify with one gun.

And if they'd come out with a duty-quality WML that fits the shorter X-Compact rail, or a version of the X-Compact grip that has one more rail notch so it's flush with the Compact slide and could accept a normal WML, then I'd just keep it in that configuration all the time.

I don't know how to take or post pictures, so won't, but my P320's all look about like any other P320. Mine have the x-grips, mostly the x-compact, and my boys use stock grips for now. All have trijicon XR sights in yellow and orange. All of mine have straight triggers, some Sig factory, also Apex and Grayguns. Otherwise, stock and look stock, with no plans to change them.

In the x-compact grips I have both compact and subcompact slides, and while I had the x-carry on the full size, I'm now running the x-carry grayguns grip module which is made for a compact slide, but am running it with a full size. The dust covers overlap. My magazines are all clipped to run in the x-frames.

Mine is a P320 X Carry (coyote tan) that I put an M17 slide on to.

Amazingly accurate with either slide set up and I love the trigger.

I have a 320 X Compact on order. It will be my carry gun unless the new 365 XL comes in first!!

My duty pistol:

I sold my P320 Carry and bought a P320 X Compact. I Love it!

Just a plain Jane FS 45.

P320FS-45, P320C-RX-9 and P320FS-9.

The P320FS-9 was sent to GGI for their Competition Action Package along with Dawson FO front and GGI rear sight installation. This was performed prior to the SIG voluntary upgrade being announced. Post SIG voluntary upgrade, GGI provided their Competition Trigger System with straight trigger.

The P320FS-45 and RX-9 have been through the SIG voluntary upgrade. Post voluntary upgrade I added GGI triggers to both and a threaded barrel on the RX.

I prefer Talon granulate grips which are on all three grip frames.

All three are fun to shoot and are only used at the range.

This is my 320! There are many like it, but this one is mine! Oh wait...this one over HERE is mine!

In compact form
find the closest shell station

Carry


**ETA**
And thanks to RogueJSK, now available in a subcompact

This message has been edited. Last edited by: gearhounds,

quote:

Originally posted by gearhounds:
And in the near future, I’m going to add the subcompact frame.

Check your email. I have a Medium FDE Subcompact grip module and 2x 9mm 12 round mags for you. Instant Karma.

With your Compact slide, it'll look like this, and will fit in all your Compact/Carry holsters.

Sweet Karma there, RogueJSK. Kudos.

Question...I see you like the Trijicon HDs on your slide(s). I take it you prefer them over the X-Rays, or have you compared?

quote:

Originally posted by dehughes:
Question...I see you like the Trijicon HDs on your slide(s). I take it you prefer them over the X-Rays, or have you compared?

I had XRays on a couple other P320s that I sold. And I currently have X-Rays on my P365. I have Trijicon HDs on this P320 and several Glocks.

I do like the Xrays. If I get a gun that already has Xrays, I won't bother swapping them out. But if adding night sights to a gun without them, I have a slight preference for the HDs. I find the HD front sight to be slightly easier to pick up, since it's a bit bolder than the X-ray front sight.

The downside for HDs is that they're taller and have sharper edges than most other sights, including the Xrays. As a result, Xrays are a better option for guns that need to be lower profile and more snag free, like a P365 that you plan to pocket carry.

(But unless you're built like Paul Bunyan, you're not going to be pocket carrying a P320, even a Subcompact.)

Your generosity knows no bounds my friend- thank you! I will be doing a karma of my own in the near future- I’m overdue

Mine is just a plain 320C 45.

I had a 320C 9mm but I traded that for a VP9; then traded the VP9 $100 for a P365; then traded the P365 for a Legion 220. At some point I'll start saving up for another P320C 9mm in FDE.

[CENTER]
[/CENTER]

The left is an X Carry that had the grip cut down to a compact frame and stippled. The right is a Boresight Solution stippled Frame with night sights.

Thank you, RogueJSK. Appreciate the info.

As for my P320:

Manual safety version of the P320 Carry, and a modified X-Carry frame. Shoots naturally and easily for me (compared to other platforms). Has stock SIGLITE sights on it, but they work for me so I'll likely leave them for now.

quote:

Originally posted by Nframe:
Mine is a P320 X Carry (coyote tan) that I put an M17 slide on to.

Amazingly accurate with either slide set up and I love the trigger.

I have a 320 X Compact on order. It will be my carry gun unless the new 365 XL comes in first!!

Do you have a pic? This sounds like a sweet set up.

quote:

Originally posted by LincolnSixEcho:

quote:

Originally posted by Nframe:
Mine is a P320 X Carry (coyote tan) that I put an M17 slide on to.

Amazingly accurate with either slide set up and I love the trigger.

I have a 320 X Compact on order. It will be my carry gun unless the new 365 XL comes in first!!

Do you have a pic? This sounds like a sweet set up.

I'll try to get a pic or two this afternoon. I forget the camera when I'm out shooting.

This message has been edited. Last edited by: Nframe,

I picked up a tan P320 compact, and wanted the x-compact grip for it. Sig just came out with the tan x-compact grip, so I ordered one from Osage. It arrived very quickly, just put it on. I really do like that grip.

Osage is ridiculously fast with their shipping. This came through regular USPS, which has apparently really improved their tracking. I think I ordered this on thursday night or friday, and it was here today. Ample communication from Osage, too, and less expensive, including shipping than ordering direct from Sig.

I have a P320 subcompact that just came back from them, subject of another thread, with all manner of errors by Sig, despite several phone calls and a letter to make sure we were clear. They've sent an email with a return tag, but I think I'll do it myself and pay for new sights, instead of let them try again. I'm losing a lot of faith in sending things to Sig. Their turn time was good (10-12 days), but they got half of it wrong, didn't do half of it, and gave me multiple wrong, conflicting stories.

I do like the pistols, though.