SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    HK gurus, thoughts on swapping the new VP9 / P30 17 rd red followers into a 10 rd SK mag to increase capacity?
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
HK gurus, thoughts on swapping the new VP9 / P30 17 rd red followers into a 10 rd SK mag to increase capacity? Login/Join 
I run trains!
Picture of SigM4
posted Hide Post
quote:
Originally posted by cslinger:
I don’t think the new follower is only red/orange. All mine(17 shot new design) are black unless this is a current change moving forward.


Same. I have some early 17 round mags that came with a VP9 that have red followers. I also subsequently converted some of my 15 round mags when HK had a big sale on conversion kits. Those all came with the new style black followers. No rhyme or reason as to color that I can see.



Success always occurs in private, and failure in full view.

Complacency sucks…
 
Posts: 5432 | Location: Wichita, KS (for now)…always a Texan… | Registered: April 14, 2006Reply With QuoteReport This Post
Member
posted Hide Post
Do the black ones have the dimple on the baseplate and floor plate. That seems to be the indicator of the higher capacity.

Both my P30’s came with red, the upgrade kits were red. I don’t do the VP9 so no idea there.

I actually think the red is more for visibility in the witness holes and the swap just sorta/kinda happened around the upgrade time. That is just my personal WAG though.
 
Posts: 7540 | Location: Florida | Registered: June 18, 2005Reply With QuoteReport This Post
E tan e epi tas
Picture of cslinger
posted Hide Post
Mag spring baseplate does have a dimple on the “locking lug????” That locks the baseplate on.


"Guns are tools. The only weapon ever created was man."
 
Posts: 8014 | Location: On the water | Registered: July 25, 2002Reply With QuoteReport This Post
Member
posted Hide Post
Well I pulled one apart again. Seems the floor plate is thicker as well. I sanded that down but while I can get 15 in, I can't get it to seat in the gun. I will sand some more top and bottom to get them to the same thickness as the conversion kits.
 
Posts: 7540 | Location: Florida | Registered: June 18, 2005Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    HK gurus, thoughts on swapping the new VP9 / P30 17 rd red followers into a 10 rd SK mag to increase capacity?

© SIGforum 2024