SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    P320 X Compact magazine question
Go
New
Find
Notify
Tools
Reply
  
P320 X Compact magazine question Login/Join 
Member
posted
Hey guys, I just ordered a P320 X Compact from Eurooptic because they have them for $599, which is the cheapest I've seen any P320 in a very long time. It was kind of an impulse buy, but after I purchased it I started looking for mags, and came across a YouTube video indicating that standard P320 Compact magazines must be modified to fit in the X. I then started searching specifically for P320 X Compact magazines, and can't find them listed for sale anywhere. I did see something about "new style" baseplates for standard mags. So, will standard P320 Compact magazines fit in the X now? My searching doesn't tell me anything about X magazines except how to modify standard magazines, and I can't find anything about the new baseplates.

Thanks guys.
 
Posts: 5 | Registered: February 28, 2021Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
I ordered these for my P320XC, and they work just fine.

Welcome to the forum, BTW.




“I can’t give you brains, but I can give you a diploma.”
— The Wizard of Oz

This life is a drill. It is only a drill. If it had been a real life, you would have been given instructions about where to go and what to do.
 
Posts: 47955 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002Reply With QuoteReport This Post
Member
posted Hide Post
Excellent, thank you!
 
Posts: 5 | Registered: February 28, 2021Reply With QuoteReport This Post
Member
posted Hide Post
The baseplates have tabs that fit cutouts in the regular grips. On the old mags the tabs are too fat and won't fit x grips unless you shave them down or replace them. The new ones are skinnier to fit either. The old style has a round retaining pin and the new is rectangular.

I got a good deal on old style mags and spent ten minutes with a sanding block and now they work fine.
 
Posts: 322 | Registered: May 03, 2004Reply With QuoteReport This Post
Member
posted Hide Post
CDNN has the new baseplates very reasonably priced. They were a big help as I have perhaps 40 mags. The new plates work in older models, too, even 250's.
 
Posts: 17318 | Location: Lexington, KY | Registered: October 15, 2006Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
quote:
Originally posted by k:
On the old mags the tabs are too fat and won't fit x grips unless you shave them down or replace them.


Thanks for that explanation.




“I can’t give you brains, but I can give you a diploma.”
— The Wizard of Oz

This life is a drill. It is only a drill. If it had been a real life, you would have been given instructions about where to go and what to do.
 
Posts: 47955 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002Reply With QuoteReport This Post
Member
posted Hide Post
The old magazine baseplates can be fixed in a minute with a set of nippers. Just clip off the dog ears. Done. No problem at all. You can go to the trouble of sanding or shaving the dog ears down to an angle to fit into the grip, or you can simply chop them off, without any problem.
 
Posts: 6650 | Registered: September 13, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    P320 X Compact magazine question

© SIGforum 2024