P320C Ultrasonic Cleaning

Member

posted

Can the P320C be safely cleaned ultrasonically?

Many thanks,

Lyman

Posts: 16 | Registered: April 22, 2018

Sig2340

Step by step walk the thousand mile road
Picture of Sig2340

posted

To my knowledge, the FCU contains no aluminum or plastic, so it should be okay in an ultrasonic cleaner.

NOTE: This is the FCU, by itself, outside the grip frame.

Nice is overrated

"It's every freedom-loving individual's duty to lie to the government."
Airsoftguy, June 29, 2018

Posts: 32675 | Location: Loudoun County, Virginia | Registered: May 17, 2006

Ignored post by Sig2340 posted

RichN

Member

posted

quote:
Originally posted by Sig2340:
To my knowledge, the FCU contains no aluminum or plastic, so it should be okay in an ultrasonic cleaner.

NOTE: This is the FCU, by itself, outside the grip frame.

Isn't there a plastic block at the back that holds all of the little springs and levers?

------------------------------
"They who would give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety."
- Benjamin Franklin

"So this is how liberty dies; with thunderous applause."
- Senator Amidala (Star Wars III: Revenge of the Sith)

Posts: 1494 | Location: Southwest Ohio | Registered: October 07, 2011

Ignored post by RichN posted

Member

posted

quote:
Originally posted by Sig2340:
To my knowledge, the FCU contains no aluminum or plastic, so it should be okay in an ultrasonic cleaner.

NOTE: This is the FCU, by itself, outside the grip frame.

Thanks for the input, much appreciated!

Lyman

Posts: 16 | Registered: April 22, 2018

Ignored post by lgldsr73 posted

sigfreund

Freethinker

posted

A plastic part is the small slide catch spring post at the front of the slide catch lever.

quote:
Originally posted by RichN:
Isn't there a plastic block at the back that holds all of the little springs and levers?

That’s the sear housing and is metal that’s attracted by a magnet in my P320s.

► 6.4/93.6

“The Marxist binary: victims and victimizers.”
— Victor Davis Hanson

Posts: 48110 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002

Ignored post by sigfreund posted

Member

posted

quote:
Originally posted by sigfreund:
A plastic part is the small slide catch spring post at the front of the slide catch lever.

quote:
Originally posted by RichN:
Isn't there a plastic block at the back that holds all of the little springs and levers?

That’s the sear housing and is metal that’s attracted by a magnet in my P320s.

Good to know, thanks!
Lyman

Posts: 16 | Registered: April 22, 2018

Ignored post by lgldsr73 posted

hrcjon

Member

posted

When I read this post I pulled an FCU and looked at it because it sure looks like plastic to me. But eventually curiosity overcame me and I played with it enough to prove to myself its metal. it is.

“So in war, the way is to avoid what is strong, and strike at what is weak.”

Posts: 11338 | Registered: October 14, 2004

Ignored post by hrcjon posted

Member

posted

quote:
Originally posted by hrcjon:
When I read this post I pulled an FCU and looked at it because it sure looks like plastic to me. But eventually curiosity overcame me and I played with it enough to prove to myself its metal. it is.

Excellent, thank you.

Lyman

Posts: 16 | Registered: April 22, 2018

Ignored post by lgldsr73 posted