Yesterday i've discovered that my MK25 meprolight frontsight was dead, i've bought the gun in 2013, after that i've looked to my P320C and... the frontsight was dead,i've bought the gun in 2014, as i have a p320FS with the frontsight in perfect condition, i've decided to install it on my P320C, so after the change the frontsight was... dead!!! WTF!!! i've bought one from Brownell's 2 years ago and after 1 month the tritium was dead! Have anyone experienced something similar? I can't find a sightstool for the P320. I've tapped the baseplate of the frontsight and not the frontsight himself to avoid cracks and damage but it doesn't help visibly.
Tritium night sights typically have a shelf life of about 12 years. It wouldn't hurt to contact SIG or BROWNELL'S about a replacement.
I've never had a night sight just go 'dead', especially as quickly as you've experienced. They do get progressively weaker over time but are still visible.
If people would mind their own damn business this country would be better off. I owe no one an explanation or an apology for my personal opinion.
Posts: 11218 | Location: Somewhere north of a hot humid hell in the summer | Registered: January 09, 2009
Night sights fail. I purchased a P224 new when they first came out and the front sight went out about one month later. I contacted Sig and told the that the LE Dept I work for had Sig Armorers on staff, and they sent me the sight and requested that I return the dead one to them.
No hassle. If you dont have a certified armorer, they may want you to sent the gun back to them, bud my guess is that they will fix it.
Posts: 553 | Location: Ohio | Registered: April 13, 2012
The problem is that here in switzerland sig sauer CS is inexistant the waiting time for parts or everything is 6 months!!! I m sure they have no sights in stock. For exemple we have no solutions for the volontary upgrade programme they don't want to hear something about this problem. I will contact meprolight directly.
So I took my P245 to the range today. It is dated 99 (KK)
When I got home I took it to a dark room and the nights still glow. They are so faint your eyes pretty much have to dark adapt and then you need to stare right at them but damn if all three dots are not still putting out a tiny, minuscule glow.
"Guns are tools. The only weapon ever created was man."
Posts: 8040 | Location: On the water | Registered: July 25, 2002
I have had two night sights "wink out," I assume because something happened to make the tritium gas escape. It wouldn't take much. I don't remember if they were Meprolight brand. It could potentially happen to any brand.
Posts: 29131 | Location: Johnson City, TN | Registered: April 28, 2012
Just my experience, so take it for what that’s worth. Mepro’s customer service SUCKs. I had to argue with them on three separate phone calls to get a front sight replaced that was less than two years old. They were rude every time I spoke to them. Trijicon or Ameriglo are all I use now. Hopefully your experience will be different
"Attack life, it's going to kill you anyway." Steve McQueen...
Posts: 7140 | Location: TEXAS | Registered: July 18, 2005
