For real?

| sorry. we've been so busy at work. I finally had time to run my three mags. Ran two mags in my 43X MOS and one mag in a coworker's silver-slide 43X. All mags were loaded with CCI 125gr Blazer Brass FMJ ammo and Federal 115gr JHP HST. So only a 90 round test. Guns ate it all with no issue. That 15th round is hard to load by hand.
Not minority enough! |
| | | Posts: 8833 | Location: Cleveland, OH | Registered: August 09, 2007 |  
IP
|
|
Raised Hands Surround Us Three Nails To Protect Us

| My buddy got his two magazines and neither will accept more than 4 rounds. Even trying to use a magazine loader they will only accept 4 rounds. I need to pop the mags apart and reassemble them to see if that does anything?
———————————————— Dark nights I wrestle with my flaws in the silence. The enemy inside me turns my thoughts into violence but higher than despair is the rock that I climb. You’re the refuge in my chaos Lord, hear my cry!!
|
| | |
Member
| I got three of these. Didn't have a ton of time today, but they worked with my PMM compensator. The Shield Arms mags did not.
I will take this combo out later this week and again next week and try to get 500-600 rounds through it. |
| | |
Chilihead and Barbeque Aficionado

| Got a couple of Micro Dagger mags. Damn are they hard to load more than five rounds when new. The PSA rep said they would be better when they break in. I sure hope so. Anyone know how to get the base plates off for disassembly and cleaning?
_________________________ 2nd Amendment Defender
The Second Amendment is not about hunting or sport shooting.
|
| | |
The Blue Machine

| quote: Originally posted by 2Adefender: Anyone know how to get the base plates off for disassembly and cleaning?
They come apart like most mags, press the baseplate retainer “button” on the bottom of the baseplate, and while holding it in, slide the baseplate forward and off of the magazine body. The PSA logo is the “button” part of the baseplate retainer. |
| | | Posts: 1666 | Location: South Carolina | Registered: February 27, 2003 |  
IP
|
|
Chilihead and Barbeque Aficionado

| Aha, the hidden button. Thanks.
_________________________ 2nd Amendment Defender
The Second Amendment is not about hunting or sport shooting.
|
| | |
For real?

| My 3 plain ones have worked with no issues in my 43x mos for almost 1k rds now. Will order the slick version eventually to try. Just sold off my Shield mags and mag catch so I won’t be tempted to get the AF 1911-S15 to justify keeping the old mags. 
Not minority enough! |
| | | Posts: 8833 | Location: Cleveland, OH | Registered: August 09, 2007 |  
IP
|
|
Member
| Forget the mags, for a moment. I just want them to make more of the PISTOL so that I can get my hands on one. Even if it only functions with OEM Glock 10rd mags, I am waiting.... |
| | |
Still finding my way

| I went on a camping trip last weekend and one of the guys had this and the G19 size Dagger. I was really impressed. I don't shoot the small ones very well but I will be ordering the full and compact frame set and swap over my gen3 G19 slide. They have them in stock for $120 for both. Now I can have a non finger groove Gen3 G45! |
| | |
Still finding my way

| I'm going to swap the trigger I have in my Gen3 Glock over to the Dagger frame. I went ahead and orderred a complete slide assembly too. Now I'll have a complete pistol for the total price of $254. I'm not a doctor, nor do I play one on TV but I think I found a glitch in the Matrix. They are selling the complete pistols for $299 but you can get the complete slide for $194 and the frame for $60 and all that is left out in one P-Mag. Smoking deal if this proves reliable. I went with the green frames and black slides for a cool two tone. Both full and compact frames since I have a lot of Glock mags for each. |
| | |
Still finding my way

| My Franken-G19X and compact Dagger arrived. I'll be taking them to the range this weekend to see how they do. |
| | |