May 06, 2018, 03:33 PM
bczrxP220 Stainless Elite- ejector? [RESOLVED- Thanks!]
Hi All,
I detail stripped a 2012 P220 Stainless Elite about 2 months ago and baggied everything.
Long story, but am now starting to put it back together.
As I do so, I ran into something that isn't making any sense to me- I don't see an ejector.
Is this common for the P220 Elite Stainless with the SRT installed?
I read somewhere that it is, and can't see anything sticking up like an ejector in any field-stripped pictures. All I see is the slide stop sticking up.
Any tips would be appreciated.
thanks!
May 06, 2018, 03:37 PM
gearhoundsUnless something has changed, the ejector is built into the slide catch.
May 06, 2018, 03:42 PM
12131quote:
Originally posted by gearhounds:
Unless something has changed, the ejector is built into the slide catch.
Nothing has changed.
May 06, 2018, 03:42 PM
bczrxThanks All,
I prefer to look foolish by double-checking what seems obvious, rather than causing damage to others or myself.
Thank you!
May 06, 2018, 03:44 PM
12131Since I see that you have the P225 in your sigline, same thing goes for the original P225/P6.
May 06, 2018, 03:53 PM
bczrxquote:
Originally posted by 12131:
Since I see that you have the P225 in your sigline, same thing goes for the original P225/P6.
Thanks!
I haven't detail stripped it, and am chagrined to say that I only pull the P225 out about once every 2 or 3 years to shoot. Not much free time and a number of options.
I am at the office and looking at the small parts [not frame or slide/barrel- just everything else] to see what I need to order from Midway.
I didn't see anything that looked like an ejector, so thought I'd ask.
Thanks again!