Good everyone, As per many suggestions I replaced the recoil spring in my P220 9mm. I ordered what appears to be the correct spring frpm Wolf springs and it's 18#. Physically longer than the 15# OEM. I'll aattach a pic. It is noticebly stronger when I rack it. But now Frequently with any mag the first round rack cause a nose up jam into the chamber. The silde appears to over run the case and ding it. Tomorrow I am going to run another 7 mags with the OEM spring to confirm. Any Ideas?
https://live.staticflickr.com/...388_7da0d6c317_b.jpg


https://live.staticflickr.com/...547_a0fa964f81_b.jpg

It's not unusual for a new spring to be longer than the old one. I would, however, try a 15 pound spring, if that's what was originally in it. Also, of course, the clean a lube routine.

quote:

Originally posted by Fredward:
It's not unusual for a new spring to be longer than the old one. I would, however, try a 15 pound spring, if that's what was originally in it. Also, of course, the clean a lube routine.

Agreed on length and I think todays test with the old spring will confirm The new one is to strong.

I'll post up this afternoon.

TY, Mike R