SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Aftermarket 320 slide without lightening cuts?
Go
New
Find
Notify
Tools
Reply
  
Aftermarket 320 slide without lightening cuts? Login/Join 
The guy behind the guy
Picture of esdunbar
posted
Title says it all. Does anyone know of an aftermarket 320 slide that doesn’t have lightening cuts? Specifically the carry length slide (3.9” barrel).

I have an x-five FCU on its way and the new Wilson grip, so I need a slide. Barrel is TBD, but I think I already know what I want for that.
 
Posts: 7548 | Registered: April 19, 2006Reply With QuoteReport This Post
Member
Picture of JBird679
posted Hide Post
Why does it have to be aftermarket? Every one I’ve seen was tricked out with cuts and plates and such. MGW has plain old factory slides in all lengths, calibers, and colors for $260.

You could probably also find a complete slide or conversion kit for near the same price and sell the barrel if it’s not what you want.

...or are you trying to build a non-Sig P320? Norsso has a custom option with pretty minimal porting, but it has gills and costs way more than factory.
 
Posts: 987 | Location: Upstate, SC | Registered: March 19, 2008Reply With QuoteReport This Post
Member
Picture of JBird679
posted Hide Post
Actually, the Norsso “Benthan” might be what you’re looking for. $320 stainless, 20 bucks for black. Adding an optic cut isn’t much more.
http://norsso.com/p320-compact-special-order/


(I think it’s the Bentham, I’d check with them before ordering.)
 
Posts: 987 | Location: Upstate, SC | Registered: March 19, 2008Reply With QuoteReport This Post
The guy behind the guy
Picture of esdunbar
posted Hide Post
Thank you!!! I was on Norsoo’s site but somehow missed that one. Everything I was seeing had cuts on it.

As why aftermarket, yeah, I just would prefer not to use Sig parts when it’s possible. I see too much cost cutting from them and frankly don’t trust their stuff. So when I have an option, I choose the option.
 
Posts: 7548 | Registered: April 19, 2006Reply With QuoteReport This Post
Member
Picture of Bob RI
posted Hide Post
Who has parts kits in stock for the slide? Or will you have to gut an existing slide?
 
Posts: 4522 | Registered: January 22, 2005Reply With QuoteReport This Post
Member
posted Hide Post
Yes, that’s what stops me. It’s easy to find parts kits for Glocks but I can’t find kits or even all the parts for 320’s or CZ P10’s. Also I hate that you can’t find optics plate covers outside of Glock. I would cut my P10C with jagerwerks right now but they don’t sell a plate cover. I love optics cut slides but I sometimes take off the optic and I won’t do it if I can’t cover the cut.
 
Posts: 7540 | Location: Florida | Registered: June 18, 2005Reply With QuoteReport This Post
Member
posted Hide Post
I'd love to be able to order a second Pro series slide direct from SIG, it has the cut out for the DPP, the cover and no lightening cuts. I suspect we'll see them eventually as SIG used to sell the RX slides separately.
 
Posts: 4791 | Location: Where ever Uncle Sam Sends Me | Registered: March 05, 2007Reply With QuoteReport This Post
Member
posted Hide Post
Osage has parts kits, or individual parts. Whatever is needed. The Sig site has a small parts finder that includes everything one might want for spare parts or to outfit a pistol. There are multiple aftermarket triggers available, as well as custom parts like extended mag releases, etc..even a "gas pedal" slide lever.

Certainly not as much as is available for Glocks in the aftermarket arena, but getting parts is no problem.
 
Posts: 6650 | Registered: September 13, 2006Reply With QuoteReport This Post
Member
Picture of JBird679
posted Hide Post
quote:
Originally posted by Bob RI:
Who has parts kits in stock for the slide? Or will you have to gut an existing slide?

Norsso has those too. You still need barrel, recoil spring, and sights. This ends up being a REALLY expensive way to get a P320. Doesn’t seem worth it to me but to each his own.
 
Posts: 987 | Location: Upstate, SC | Registered: March 19, 2008Reply With QuoteReport This Post
Member
Picture of Bob RI
posted Hide Post
quote:
Originally posted by JBird679:
quote:
Originally posted by Bob RI:
Who has parts kits in stock for the slide? Or will you have to gut an existing slide?

Norsso has those too. You still need barrel, recoil spring, and sights. This ends up being a REALLY expensive way to get a P320. Doesn’t seem worth it to me but to each his own.


Out of stock...like everywhere else. I can find parts listed but not in stock. Agree on the expense part for sure.
 
Posts: 4522 | Registered: January 22, 2005Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Aftermarket 320 slide without lightening cuts?

© SIGforum 2024