Page 1 2
Go | New | Find | Notify | Tools | Reply | |
| Member |
Again closing the loop on above comments. Robert Burke milled your 227 for an Aimpoint ACRO? If so he certainly could easily do a 226. But I sincerely doubt he did that. But if he did its exactly what is needed here so let's here the specifics.This message has been edited. Last edited by: hrcjon, “So in war, the way is to avoid what is strong, and strike at what is weak.” | |||
|
| Member |
Vulcan Machine Werks lists the P226 and ACRO together. There is a note that variant restrictions apply. My ASSUMPTION was that they were trying to get ahead of the guys with folded slide guns, but I don't see the same note under RMR. I've only seen one of their cuts in person and it looked great. I had a buddy who had them cut a Staccato and he said they were very responsive to his questions. | |||
|
| Member |
As I think about it more, I'm curious if the long extractor slides and an issue with the size and depth of an ACRO cut. A lot of places are pretty aggressive in the cut for an ACRO or 509T because of the clamp-on nature of the optic. They can mill the sides lower them the center without risk to the slide and the clamp style optics happen to be lower on the sides then the center. The ACRO body is relatively long as well. Perhaps that's the issue. | |||
|
Sigforum K9 handler |
You’re thinking along the same lines that I am. I want it for a T&E project, and having it cut to be able to only use the Acro doesn’t bother me. | |||
|
| Member |
I don't know JL, but this might be an excellent DIY project! A dremmel tool, a good bastard file, maybe some epoxy or JB Weld. Start nipping at the bottle before you start, it will steady your hands and give you better judgement. Let me know if you want some help, I got a sawsall ! ______________________________________________________________________ "When its time to shoot, shoot. Dont talk!" “What the government is good at is collecting taxes, taking away your freedoms and killing people. It’s not good at much else.” —Author Tom Clancy | |||
|
| Member |
Not that jljones might care but looking at that pictures on Vulcan machine, its not clear to me that you can get a set of backup irons on this ACRO mill. That's pretty much my no go on milling anything. But you might have to ask. “So in war, the way is to avoid what is strong, and strike at what is weak.” | |||
|
| Member |
Vulcan Machine Works in Plano does good work. They've done RMR cuts in a couple of my CZ P-07/09 slides. I believe Robert Burke outsources his slide work to Vulcan and according to Wayne Dobbs (co-owner Hardwired Tactical Shooting, Aimpoint LE sales rep), they've done a ton of work for various Texas LE agencies. Or, what about a SIG Pro Series replacement slide and a C&H Precision plate? I'm not entirely sure it's a thing. It's certainly more expensive. | |||
|
| Sigforum K9 handler |
Not a fan of the Pro slides. Will probably use PMM to have it cut for an RMR and go from there. | |||
|
| Member |
You're not wrong. On the other hand, modular plate systems add another failure point, and most use very shallow screws. So what are "your" priorities? I'd expect the Aimpoint P-2 to be relevant for at least five years. SIG's website shows replacement slides for $250, so you're not completely screwed. | |||
|
| Member |
Is that an aesthetic or functional preference? | |||
|
| Sigforum K9 handler |
Function. Not all slides can adapt to various optics and cool guy cuts without significant change ups in the springing. Fact of the matter is, with any gun manufacturer, cool guy cuts give them curb appeal on an item that won’t get shot much for your average consumer. The consumer that will shoot it a lot will either ditch it for something else, or seek out the proper fix to make it run. There is no down side for the manufacturer. | |||
|
| Powered by Social Strata | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
© SIGforum 2024