Looking to get my HK P7 refinished. Maybe hard chrome?
Not a good picture but I believe there are a few pics on our site ccrrefinishing.com
Cummings Custom Refinishing offers Quality Craftsmanship at affordable prices. Fully Lic FFL's for over 30 years OFTEN IMITATED BUT NEVER DUPLICATED 423-639-8924 www.ccrrefinishing.com
July 19, 2017, 09:59 PM
jer830
I'd go with Robar. Either hard chrome or Np3.
July 20, 2017, 12:43 AM
photoman12001
CCR did my P7M8 slide and I'm very pleased with it.
Not a good picture but I believe there are a few pics on our site ccrrefinishing.com
I could not find any pictures of P7's on your site.
What is the recommended way to finish a P7? and the cost to do it with two mags?
I love it here!
My Gun collection: Too many to list. Lets just say that the zombies should look elsewhere.
July 24, 2017, 04:54 PM
CCR
Cummings Custom Refinishing offers Quality Craftsmanship at affordable prices. Fully Lic FFL's for over 30 years OFTEN IMITATED BUT NEVER DUPLICATED 423-639-8924 www.ccrrefinishing.com
July 25, 2017, 02:08 PM
BigNC
I purchased a NIB 226 that had been refinished by CCR years ago. I carried the thing for hundreds of sweaty Florida days in (gasp) hard kydex before anything started to rub off on the high spots. I have rusted through the factory finishes on numerous other guns in literally single digit DAYS of carry.
Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety. - Ben Franklin
July 25, 2017, 03:44 PM
terma-nator
I found a video of one. I would like to finish mine like this. Would this be called "Matte" finish on entire gun? How would this be described? I'm not sure what to ask for, but this is what I want mine to look like. . .
This message has been edited. Last edited by: terma-nator,
I love it here!
My Gun collection: Too many to list. Lets just say that the zombies should look elsewhere.
July 26, 2017, 07:51 AM
Wreckless
quote:
Originally posted by photoman12001: CCR did my P7M8 slide and I'm very pleased with it.
Why is the cartridge loaded backward in the magazine?
La Dolce Vita
July 26, 2017, 08:07 AM
PGT
HK joke from way back
July 26, 2017, 04:00 PM
throwingdown
Many years ago HK had a company take pics for their shot show catalog. Turns out the people who did the photo shoot had no prior experience with handguns and loaded the magazines backwards. It was missed all the way till the show. Maybe a hundred or so were picked up before someone noticed and pulled the catalog.
Since it has been somewhat of a inside joke when people post pics of their pistols.
July 27, 2017, 05:49 AM
photoman12001
quote:
Originally posted by Wreckless
Why is the cartridge loaded backward in the magazine?
^^^^^What they said. I was feeling a bit goofy when I took that. I actually snapped the photo normally then reversed the top round on a whim.
Just curious when your next refinishingsale is going to take place. Need to refinish a Sig 220ST
August 02, 2017, 01:00 PM
CCR
Soon I will keep you posted
Cummings Custom Refinishing offers Quality Craftsmanship at affordable prices. Fully Lic FFL's for over 30 years OFTEN IMITATED BUT NEVER DUPLICATED 423-639-8924 www.ccrrefinishing.com
August 02, 2017, 02:15 PM
12131
Labor Day is just around the corner.
Q
August 06, 2017, 12:38 AM
NYresq
I had my P7M8 refinished by Robar in their NP3 coating. It is like nothing else I have ever seen. A matt finish that is super slick, clean with a simple wipe off and doesnt wear off.
I want to send off a lever action rifle to have them coat that as well.
_______________________________
Sig, Colt M-16/M-4/1911 and Glock Armorer. I love my P229, but if I had to go to a war, I would take my Glock...
August 07, 2017, 12:19 AM
Loswsmith
quote:
Originally posted by photoman12001: CCR did my P7M8 slide and I'm very pleased with it.
1) LOVE the look of the two tone. What finish did you use for the slide?
2) Love the nod to the H&K preferred and approved bullet orientation in the mag!
___________________________________________ Life Member NRA & Washington Arms Collectors
Mistake not my current state of joshing gentle peevishness for the awesome and terrible majesty of the towering seas of ire that are themselves the milquetoast shallows fringing my vast oceans of wrath.
Velocitas Incursio Vis - Gandhi
August 07, 2017, 06:16 AM
SilentMike
I had my M8 police trade in with plum slide and mill mark (the original German police or military crest was milled away) refinished by Fords in hard chrome 10 or 12 years ago. They did the refinish, installed supplied night sighs, removed the mill mark and re-engraved the original data on the slide. The finish is just as beautiful now and when I received it back from fords a decade or more ago.
Mike Smith/AAC SilentMike
Mike Smith 404-213-7753
August 09, 2017, 07:55 AM
terma-nator
quote:
Originally posted by CCR: terma-nator May I asked why hard Chrome? Other plating such as our CPII (Nickel Boron Nitride and Robars NP3(Nickel Teflon) offer better lubrication
I was thinking it over. But since you are running a special, you pushed me over the fence. I would just like to confirm what to ask for when sending in my P7. I would like it to look like this video. It appears to be matte completely.
Would your CPII look like this?
Dave
I love it here!
My Gun collection: Too many to list. Lets just say that the zombies should look elsewhere.
August 09, 2017, 08:19 AM
jljones
quote:
Originally posted by Wreckless: Why is the cartridge loaded backward in the magazine?
I believe it was the 2004 HK catalog that had a P2000 on the cover. An extra magazine was laying beside the gun in the photoshoot. The extra magazine had the top round installed backwards. No one at HK apparently proofed the picture before it went out. Many long time HK fans have since paid homage to this by photoshoots that show an extra magazine, with the top round backwards for HK products.
