Thanks JL for response! ATEi seem like good people - note that they loaned pistols for the event in Detroit where hundreds of women were introduced to handguns and their safety.
Bullseye has become such a small part that I sense they are not keen on dealing with it.
Your contributions are always interesting and often valuable. Mac
Mac in Michigan
June 30, 2018, 10:31 AM
98XJRC
Well I went and finally did it. Picked up a 5” 2.0 with no safety or LCI. My dealer just started getting them in and it was the second one they had received. I was more than stoked when I saw it without the safety and LCI. I can’t wait to get it to the range and give it a go. I considered the 17 as I carry a 19 but I couldn’t resist the M&P this time around.
Planning on fiber optic front with black rear from Warren Tactical, APL, and one the fence about an Apex trigger kit. Their on sale currently at Rainier just not sure if I’m going to pull the trigger.
"It's a bold strategy, Cotton. Let's see if it works out for them"
June 30, 2018, 09:47 PM
98XJRC
As requested. Jerry I know you had talked about it and quite honestly may have forgotten at this point, but did you change the 2.0 trigger out to Apex and if so what where your thoughts.
Still learning Flickr after years of photobucket, so here’s the link in case the photos don’t show
M&P 2.0 5”This message has been edited. Last edited by: 98XJRC, July 01, 2018 09:18 AM
June 30, 2018, 09:56 PM
dehughes
Pics aren't working in this thread, but the link is good. That's a nice looking pistol.
________________ tempus edax rerum
July 01, 2018, 07:58 AM
jljones
quote:
Originally posted by 98XJRC: As requested. Jerry I know you had talked about it and quite honestly may have forgotten at this point, but did you change the 2.0 trigger out to Apex and if so what where your thoughts.
I ran gun #1 stock for quite some time. Then on a whim, I did an impulse buy at my LGS and bought a duty carry kit and put in it. My other two 2.0s are stock as of today, including the 2.0 Compact that is my carry gun. The DCAEK allows me to milk just a little bit more performance out of the gun. I mean I ^think^ it makes the difference between burning .19 splits and .16.
The stock trigger is completely usable, and I think it is the best stock service pistol out of the box of any of the major players.
My first 4.25 and my 2.0 compact will leave this week to go out to Apex. Randy is going to inspect the high round count gun to see if there is any data of value for their design team, and probably slap a barrel in both guns. I've been talking about doing this for six months, but finally am making it happen. I plan on packaging them up today, and shipping them tomorrow.
"It's a bold strategy, Cotton. Let's see if it works out for them"
July 02, 2018, 11:09 PM
98XJRC
For those not aware S&W is currently running their summer promotion which is a $50 cash card for the purchase of an M&P pistol (minus Shields). Couple other models available as well with varying levels of cash. While I paid $499 it takes what Sportsman Outdoor Superstore has at $429 to $379 after rebate.
Originally posted by 98XJRC: For those not aware S&W is currently running their summer promotion which is a $50 cash card for the purchase of an M&P pistol (minus Shields). Couple other models available as well with varying levels of cash. While I paid $499 it takes what Sportsman Outdoor Superstore has at $429 to $379 after rebate.
I narrowly missed a new $349 2.0 compact this weekend...pre-rebate price. Smokin' deal.
******************************
May our caskets be made of hundred-year oak, and may we plant those trees tomorrow.
July 15, 2018, 11:23 AM
P320Mac
Follow-up on mounting Venom onto DW: After lots of contemplation, noticed that back of the rear sight is a flat - milled in front of the rear-sight-cut even with back flat & just enough to fit sight with sight's screws going into insert in the unchanged rear-sight-cut. The insert has to be wider than the slide. Not perfect, but much less material removal and one could remove the red-dot stuff and insert iron sight.
Still, M&P9 M2.0 + two-dot-sear and a few minutes work results in a very useful improvement.
Mac in Michigan
July 15, 2018, 11:33 AM
tha1000
quote:
Originally posted by P320Mac: Follow-up on mounting Venom onto DW: After lots of contemplation, noticed that back of the rear sight is a flat - milled in front of the rear-sight-cut even with back flat & just enough to fit sight with sight's screws going into insert in the unchanged rear-sight-cut. The insert has to be wider than the slide. Not perfect, but much less material removal and one could remove the red-dot stuff and insert iron sight.
Still, M&P9 M2.0 + two-dot-sear and a few minutes work results in a very useful improvement.
Primary machine, and I’m sure others do this as well, can cut for the dot and cut a glock dovetail in the slide for a glock sight.
_________________________________________ I'm all jacked up on Mountain Dew...
July 20, 2018, 06:06 PM
jljones
Aight. My M&P 4.25 that is the subject of this thread, and my 2.0 Compact leave Monday for Arizona. They will come back with new gunsmith fit Apex barrels. Randy is also going to bust down the 4.25 and inspect it while it is out there. More out of curiosity than anything due to the round count.
"It's a bold strategy, Cotton. Let's see if it works out for them"
July 20, 2018, 06:12 PM
esdunbar
I’ll be very curious to hear what you think.
Thanks to the heads in this thread I picked up my 5” 2.0 without the LCI yesterday. Thanks guys.
July 21, 2018, 01:56 AM
sns3guppy
quote:
Originally posted by jljones: Randy is also going to bust down the 4.25 and inspect it while it is out there. More out of curiosity than anything due to the round count.
"It's a bold strategy, Cotton. Let's see if it works out for them"
July 22, 2018, 08:55 AM
RHINOWSO
quote:
Originally posted by jljones: Passed 14k yesterday with the 800 rounds I shot
July 22, 2018, 07:46 PM
Kilroy2721
I bought one of the 4.25" 2.0 when they first came out after hearing all the hype from S&W. While I think the out of the box trigger is better than the 1.0, I find the grip texture to be too aggressive, and I don't like the fact that I am unable to slam the mag home and have the slide ricochet home.
And the biggest bone I have with them is that they don't have a 5" yet in black.