SIGforum
Who was the member selling the Glock mag disassembly tool?

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/4810017834

March 06, 2018, 05:35 PM
Lord Vaalic
Who was the member selling the Glock mag disassembly tool?
As the title states. I wanted to buy one at the time, but missed it when the thread was active.




Don't weep for the stupid, or you will be crying all day
March 06, 2018, 05:53 PM
qcsmitty
https://sigforum.com/eve/forums...935/m/8860040324/p/1


__________________________
If attacked by a mob of clowns, go for the juggler.
-----------------------------------
KC P220, KE P226
March 06, 2018, 06:41 PM
MNSIG
Not sure if it’s still available from the member, but is this it?

https://www.amazon.com/NcStar-...sembly/dp/B0742JNRCY
March 06, 2018, 06:54 PM
Skins2881
Wait... You can't simply open them with a pen or a punch?



Jesse

Sic Semper Tyrannis
March 06, 2018, 11:24 PM
hrcjon
yup head right on over to the official Glock armorer manual and you can do that. Why on earth you need a different tool I can't say, but I'm not judging. I don't use mag loaders either.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
March 06, 2018, 11:41 PM
soggy_spinout
Bah, I use this:

https://www.amazon.com/Magazin...-T1144/dp/B00LG64M8I



However I don't rely on the strength (or lack thereof) of my fingers to squeeze that widget. A bench vise comes in extremely handy. Squeeze it with just enough pressure and the factory mag base slides right off once the spring plate nub is pushed out of the way.
March 07, 2018, 08:29 AM
BillyBonesNY
These tools are needed for the 10rnd limited mags.
They are a monster to dis assemble without damaging components.


----------------------------------------
http://lonesurvivorfoundation.org
March 07, 2018, 09:14 AM
MNSIG
I've had mixed results with the punch method. Some new mags can be a real bitch to get past the tabs without gouging the baseplate