I can confirm that it fits both Glock and CZ P-07 Kydex holsters without interference.
Pull weight on our sample measures 4.5 lbs.
------------------------------ "The Dremel is my friend."
November 30, 2016, 02:49 PM
Gundawg
quote:
Originally posted by Randy Lee: I can confirm that it fits both Glock and CZ P-07 Kydex holsters without interference.
Pull weight on our sample measures 4.5 lbs.
would you say it's just a hair taller than a glock 19, seems the numbers are 5.2 vs 5.0
November 30, 2016, 04:57 PM
Randy Lee
quote:
Originally posted by Gundawg:
quote:
Originally posted by Randy Lee: I can confirm that it fits both Glock and CZ P-07 Kydex holsters without interference.
Pull weight on our sample measures 4.5 lbs.
would you say it's just a hair taller than a glock 19, seems the numbers are 5.2 vs 5.0
From what I can tell, the height difference is only due to the tail end of the interchangeable grip insert at the heel. If this were removed, the height from bottom of the grip to the top of the slide would be identical to the G19.
------------------------------ "The Dremel is my friend."
November 30, 2016, 05:22 PM
valkyrie1
I'm game, I could never feel comfortable with Glock frames, bought and sold many. I have a PCR,P07,P09 and the only striker fired pistol I now have is a P320 SC. Didn't like my VP9 or the Walther. I take a gamble after it's out for awhile..
December 01, 2016, 04:25 AM
sox
It would have to be a bit smaller than the P07 width wise, as I cannot come close to stuffing my P07 in G19 holsters.
I hope this represents a "family" of weapons as in small medium and large sizes.
December 01, 2016, 11:16 AM
Biggy
Does anyone know *for sure* if the current 19rd CZ P-09 mags that have the square cut out on the front side of the mag body like the new style P-10c mags have will work in the P-10c ? Similar cut out, but the location might be different.
December 01, 2016, 06:23 PM
Randy Lee
quote:
Originally posted by Biggy: Does anyone know *for sure* if the current 19rd CZ P-09 mags that have the square cut out on the front side of the mag body like the new style P-10c mags have will work in the P-10c ? Similar cut out, but the location might be different.
Unfortunately the P-09 magazines with the black follower will not work. You can relocate the notch on the front of the mag body so that they will work, but otherwise, no.
CZ is importing new mags with a brightly colored follower to distinguise between the 2 versions of magazines. This was straight from CZ USA. I also tested my personal P-09 magazines to confirm.
------------------------------ "The Dremel is my friend."
December 01, 2016, 09:05 PM
piedrarc
quote:
Originally posted by Randy Lee:
quote:
Originally posted by Biggy: Does anyone know *for sure* if the current 19rd CZ P-09 mags that have the square cut out on the front side of the mag body like the new style P-10c mags have will work in the P-10c ? Similar cut out, but the location might be different.
Unfortunately the P-09 magazines with the black follower will not work. You can relocate the notch on the front of the mag body so that they will work, but otherwise, no.
CZ is importing new mags with a brightly colored follower to distinguise between the 2 versions of magazines. This was straight from CZ USA. I also tested my personal P-09 magazines to confirm.
Randy,
Please! STOP WITH THE CZ TALK! lol
I still have memories of shooting Jeff's CZ in Richmond......
Originally posted by Biggy: Does anyone know *for sure* if the current 19rd CZ P-09 mags that have the square cut out on the front side of the mag body like the new style P-10c mags have will work in the P-10c ? Similar cut out, but the location might be different.
Unfortunately the P-09 magazines with the black follower will not work. You can relocate the notch on the front of the mag body so that they will work, but otherwise, no.
CZ is importing new mags with a brightly colored follower to distinguise between the 2 versions of magazines. This was straight from CZ USA. I also tested my personal P-09 magazines to confirm.
Randy,
Please! STOP WITH THE CZ TALK! lol
I still have memories of shooting Jeff's CZ in Richmond......
Ray
I have several for you to shoot when you visit...
------------------------------ "The Dremel is my friend."
December 08, 2016, 08:51 AM
Ryanp225
CZ just announced that the mags will have an MSRP of $35. That means we will most likely see street prices around $29. I'm sold.
December 08, 2016, 09:14 AM
soggy_spinout
quote:
CZ just announced that the mags will have an MSRP of $35. That means we will most likely see street prices around $29.
That's a pleasant change, considering what they typically want for factory CZ75 magazines.
December 08, 2016, 01:45 PM
Gundawg
quote:
Originally posted by Ryanp225: CZ just announced that the mags will have an MSRP of $35. That means we will most likely see street prices around $29. I'm sold.
Was just about to post that, it does help, hope they bring enough extra mags in to fill the need.
December 08, 2016, 06:31 PM
smithnsig
It's probably been answered, but what kind of sight compatibility does it have?
----------------------------------------------------------- TCB all the time...
December 14, 2016, 12:51 PM
Biggy
quote:
Originally posted by smithnsig: It's probably been answered, but what kind of sight compatibility does it have?
Not 100% sure, but I think any aftermarket or CZ OEM P-07 sights will fit. Same with the the P-07's RSA, will probably fit the P-10CThis message has been edited. Last edited by: Biggy,
December 14, 2016, 06:54 PM
Gary1911A1
This pistol does interest me and I may have to try one out although I'm not a hugh fan of striker fired pistols.
Originally posted by Snake207: I have to say, I'm REALLY interested in this gun.
Wonder if a P-11 is in the works - something about the same size as a P-09...
If this pistol pans out like I believe it will, we will at some point probably see different sized pistols in all calibers. 9mm,40 S&W, 45acp, and who knows maybe even 10MM. Then make a .22 RF conversion top end and mags for it.
