Well kids bid on one and got one cheaper than I thought possible ($1675). They got it for my promotion present. Should be here next week. Will try to run a few hundred rounds through it.
Anyone have suggestions on holsters?
Not minority enough!
September 24, 2023, 05:52 AM
SIGWolf
quote:
Originally posted by Chowser: Well kids bid on one and got one cheaper than I thought possible ($1675). They got it for my promotion present. Should be here next week. Will try to run a few hundred rounds through it.
Anyone have suggestions on holsters?
You raised them right it would seem!
September 24, 2023, 05:53 AM
SIGWolf
quote:
Originally posted by SIGWolf:
quote:
Originally posted by pedropcola: Range report!
Picking it up at the FFL Tuesday. Planning on going to the range shortly after.
September 28, 2023, 05:46 PM
SIGWolf
Update, picked it up.
September 28, 2023, 06:26 PM
Chowser
Beautiful!
Mine arrived yesterday. I'm going to try to shoot it tonight.
My CZ75 Compact grips "fit" but the CZ screws don't fit and the DWX screws are too short. I'm going to try some regular 1911 length screws if I can find some orings.
My trigger gauge says 4lbs.
Not minority enough!
September 29, 2023, 04:41 AM
Chowser
Not trying to steal your thunder, Sigwolf. Just figured we’d keep it in the same thread.
We got busy tonight. Finally got some downtime. Grabbed a coworker and we shot a quick 100 rounds through it. 50 fmj and 50 jhp. 12ft, 21ft, 30ft, 50ft and 75ft.
This thing is dead nuts accurate! 100 rounds in one target. We both shot a little high.
I had no issues. Coworker got bit a few times by the hammer. His hand is meatier than mine. He said a larger beavertail would solve his issue. All three mags were CZ mags. The two that came with the gun and one used one I bought from Ryanp225 last month that I added a Henning baseplate to.
I have four more baseplates arriving today to try my four new MecGar mags. Will try to shoot it this weekend.
-eta Henning baseplates arrived for the MecGar mags and 1911 grip screws with an o-ring worked on the LOK grips. Ready for another quick hundred rounds tonight.
This message has been edited. Last edited by: Chowser,
Not minority enough!
September 29, 2023, 07:00 PM
SIGWolf
quote:
Originally posted by Chowser: Not trying to steal your thunder, Sigwolf. Just figured we’d keep it in the same thread.
The more the merrier. Hopefully going to the range tomorrow. Have some Hennings baseplates and more mags on the way.
September 29, 2023, 09:22 PM
ugeesta
Traded 4 guns I fell out of interest + cash for one today.
I just love how well it fits my hand. Had a CZ 75B several years back that I sold cause I didn't like the trigger or the slide (too small for my hands). I liked the grip so really pleased CZ/DW collaborated on this one.
This gun knocks it out of the park. Can't wait to shoot it this weekend.
We will never know world peace, until three people can simultaneously look each other straight in the eye
Liberals are like pussycats and Twitter is Trump's laser pointer to keep them busy while he takes care of business - Rey HRH.
September 30, 2023, 04:15 AM
SIGWolf
quote:
Originally posted by Chowser: Beautiful!
Mine arrived yesterday. I'm going to try to shoot it tonight.
My CZ75 Compact grips "fit" but the CZ screws don't fit and the DWX screws are too short. I'm going to try some regular 1911 length screws if I can find some orings.
My trigger gauge says 4lbs.
I'm interested in the grip issue.
So, you tried some CZ75 Compact grips and they fit but the screw that came with the DWX for the DWX grips was too short?
Then the screws that were from the CZ75 Compact didn't fit, as in they were too large/small or threaded differently?
Odd the DWX screws were too short. Was that the LOK grips you had that issue with? That's really odd.
September 30, 2023, 04:47 AM
Chowser
I specifically ordered the LOK grips for the CZ 75 Compact because people said it would fit. It comes with CZ sized screws which are threaded differently than the DWX/DWX Compact. They went with standard threaded 1911 screws but a little shorter.
The screws that came with the grips will thread in a little bit but then pop and comes out. The DWX screws were too short. LOK said I could try and remove material from inside the grip to make them work with the DWX screws but I could also try some 1911 spec screws with an o-ring. LOK is working on sourcing the correct screws for the DWX.
I grabbed some 1911 screws I had and some o-rings and I got the LOK grips to fit perfectly now.
We got busy so I didn't get to try the mecgar mags. I'll try again tomorrow night. I also have some nato spec 124gr winchester ammo somewhere to try.
Not minority enough!
October 01, 2023, 05:13 AM
SIGWolf
quote:
Originally posted by Chowser: I specifically ordered the LOK grips for the CZ 75 Compact because people said it would fit. It comes with CZ sized screws which are threaded differently than the DWX/DWX Compact. They went with standard threaded 1911 screws but a little shorter.
The screws that came with the grips will thread in a little bit but then pop and comes out. The DWX screws were too short. LOK said I could try and remove material from inside the grip to make them work with the DWX screws but I could also try some 1911 spec screws with an o-ring. LOK is working on sourcing the correct screws for the DWX.
I grabbed some 1911 screws I had and some o-rings and I got the LOK grips to fit perfectly now.
We got busy so I didn't get to try the mecgar mags. I'll try again tomorrow night. I also have some nato spec 124gr winchester ammo somewhere to try.
Thanks for the detail!
October 05, 2023, 02:20 AM
Chowser
LOK emailed again and said it will be another month or two but they will have correct length 1911 spec screws for the DWX Compact.
Did another quick 100 rounds through with all 147gr ammo. No issues. MecGar mags all worked fine. This weekend, I will do 100 rounds of Winchester NATO spec 124gr ammo and 100 rounds of Ranger 124gr+P then call it broken in enough for carry if no issues.
Not minority enough!
October 05, 2023, 10:52 AM
pedropcola
Those LOK grips are sweet. So if I understood correctly you just need standard 1911 grip screws and O rings? And new baseplates for the million CZ mags I own. Lol
October 05, 2023, 01:19 PM
DanH
All while Dan Wesson said CZ 75 Compact grips and mags would work fine,
October 05, 2023, 05:12 PM
Chowser
Yes, standard 1911 grip screws fit and the orings is to fill the hole in the grip according to LOK? Something like that. Grips fit, screws don't. lol
Someone said the old 14rd baseplates work fine? I don't have any of those.
Not minority enough!
October 06, 2023, 08:51 AM
pedropcola
I’ve got tons of of CZ75 compact mags. Just send me your gun and I will try them out. Lol
October 06, 2023, 10:58 AM
smschulz
I hate it when you guys post these pictures, I have a low willpower threshold.
October 06, 2023, 04:53 PM
Chowser
quote:
Originally posted by smschulz: I hate it when you guys post these pictures, I have a low willpower threshold.
This won't help then: lol
grips actually darkened while I was cleaning the gun. Guess it needed a little oil. Ordered an IWB holster from ANR. It just shipped today.
Not minority enough!
October 07, 2023, 10:06 AM
SIGWolf
quote:
Originally posted by DanH: All while Dan Wesson said CZ 75 Compact grips and mags would work fine,
Well, sorta. The compact mags DO work, but not with the base plates that come with them. You have to order the DWX baseplates from CZ for 14.95, if the have them in stock, or from Hennings, the exact same baseplates but for 19.95. Go figure.
So, DWX compact mags cost $55 if in stock, CZ compact factory mags are $41.95 plus $14.95 for base plates and it's $56.90, more if you go with Hennings. At least with the full size the P-10 F mags will work without changing the baseplate.
I don't know about the Mec-Gar mags for the CZ compact.
Still not sure why a 19 round magazine costs less than a 15 round magazine, but.....