When I first really got into the details of P-Series SIGs, I remember seeing a number of posts about the upgraded one-piece coiled roll pins (to replace the factory two-piece design) from SIG gunsmith Gerry Ritacco. I never really heard much about them afterwards. Are they still available? Those of you who have them installed, what's your experience with them? Were they actually an upgrade?

Might want to contact him to see if he still offers them. According to ATF's FFL EZ Check, his license is still active through July 1, 2026. I have an email of his from several years ago, when we did the internal extractor group buy on the Blue site. Not sure if it's still good, but you can try. Send me an email for it, if you want to check..

His website is no longer active.

Hi MacGyver, those are spirol pins. GerryR used to give them away. I've used them with great success!

This site has them for $5 (20mm breech block pin) in stock. 20mm Pin

Thanks for the replies. Q, I’ll be sending you an email shortly for his address.

Xer0, I might be wrong, but I believe that pin is for the newer slides (with the long external extractor) only. So even if the diameter was correct, the length would be insufficient.