SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Two different Locking Inserts for the P22*'s?
Go
New
Find
Notify
Tools
Reply
  
Two different Locking Inserts for the P22*'s? Login/Join 
Member
Picture of ducatiti
posted
I saw this locking insert on sale at Optics Planet for $42. There are machined versions for $112. Machined supposed to be tougher?

Will either work but it seems like they are different, one a bigger opening on one side. Please help.

https://www.opticsplanet.com/s...king-insert-226.html

vs

https://www.opticsplanet.com/s...rt-226-machined.html

I will be picking up my new P226 Scorpion tomorrow and would like to drop in a non CA compliant locking insert (no mag disconnect safety), and have the untouched stock version as a spare or in the event I sell it in the future.
 
Posts: 56 | Registered: June 06, 2018Reply With QuoteReport This Post
Member
posted Hide Post
neither link works.
 
Posts: 6633 | Location: Virginia | Registered: December 23, 2010Reply With QuoteReport This Post
Member
Picture of ducatiti
posted Hide Post
Ok thanks. Does it matter if it's machined or not?
 
Posts: 56 | Registered: June 06, 2018Reply With QuoteReport This Post
Member
posted Hide Post
That is outside my bailiwick. I was reading this thread to learn.
 
Posts: 6633 | Location: Virginia | Registered: December 23, 2010Reply With QuoteReport This Post
Member
Picture of ducatiti
posted Hide Post
I thought you said "either would work" lol. Sorry.

Here are the correct links:

https://www.opticsplanet.com/s...king-insert-226.html

vs

https://www.opticsplanet.com/s...rt-226-machined.html
 
Posts: 56 | Registered: June 06, 2018Reply With QuoteReport This Post
Member
Picture of ducatiti
posted Hide Post
Any particular reason? Can I install the cheaper one disregarding it's the one for the mag disconnect?

I guess my main concern is for dry firing only. I don't mind having that feature.

Question is will I be able to pull the slide halfway with a snap cap in the chamber and reset the trigger on a P226? Will this wear down anything because I do this for my beretta and G17?
 
Posts: 56 | Registered: June 06, 2018Reply With QuoteReport This Post
Member
Picture of JAFO
posted Hide Post
You will reset the trigger after pulling the slide back less than an inch, so yes, you can do that with a snap cap in the chamber and not eject it. It won't hurt anything, but you may occasionally eject the snap cap without meaning to.

One alternative some people use is to cut a foam earplug and insert it in the slide between the hammer and firing pin. It cushions the blow to the firing pin without the need for a snap cap in the chamber.

As for the mag disconnect, does that still function if you remove the magazine follower? If so, you can use a foam earplug and empty mag tube to dry fire without worrying about a snap cap or locking the slide back.


<><><><><><><><><><><><><>
"I drank what?" - Socrates
 
Posts: 5182 | Location: S.A., TX | Registered: July 20, 2006Reply With QuoteReport This Post
Gracie Allen is my
personal savior!
posted Hide Post
OP, you might want to just call SIG and ask them how to identify the standard locking insert for the pistol you're getting. You don't necessarily have to tell them that you're thinking about ditching the mag safety.
 
Posts: 27309 | Location: Deep in the heart of the brush country, and closing on that #&*%!?! roadrunner. Really. | Registered: February 05, 2008Reply With QuoteReport This Post
Member
Picture of dkjbama
posted Hide Post
I think I'd find somebody else to buy from than optics planet.
 
Posts: 777 | Location: NW Alabama | Registered: January 23, 2010Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Two different Locking Inserts for the P22*'s?

© SIGforum 2024