SIGforum
Sig grip screws?

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/2970016734

February 11, 2018, 03:51 PM
wolfe 21
Sig grip screws?
I am looking to replace E2 grips with standard panels on a 9mm -1 229. What size screws do these use and are they the same on the 226 and 220 frames. I ask as I can buy 4 screws for $7 or buy a bag of 100 black oxides stainless hex heads for around $10. If I can get the right size and length screw, seems like a no brainer...


A Perpetual Disappointment...
February 11, 2018, 03:55 PM
dubagel
Give Top Gun Supply a buzz. They usually know and stock all the different size Sig grip screws.
February 11, 2018, 04:02 PM
az4783054
You can sometimes tell if the screws are interchangeable by looking at the applications on the TGS website. Keep in mind that while thread/pitch may be the same that length may vary due to grip panel variations between platforms.


Beware of a man whose only pistol is a 1911, he's probably very good with it.
February 11, 2018, 04:03 PM
Nipper
Also Greg Cote.

P226, P228 & P229 all seem to use the same screws.

https://gregcotellc.com/cart/h...32ji7it5mmvj00prr1b3


______________________
An expert is one who knows more and more about less and less until he knows absolutely everything about nothing. --Nicholas Murray Butler
February 11, 2018, 05:17 PM
12131
quote:
Originally posted by Nipper:
Also Greg Cote.

P226, P228 & P229 all seem to use the same screws.

https://gregcotellc.com/cart/h...32ji7it5mmvj00prr1b3

P226 screws are not the same as the P228/229 ones.


Q





February 11, 2018, 07:37 PM
wolfe 21
I know I need 4mm x .7mm per Greg Cote's site. I am unclear on the necessary screw length.


A Perpetual Disappointment...