I got this Hombre recently and for those that don't know, the finish on these is a nasty-looking flat-black/crinkle type blue that looks very wrong on an SAA. So I mustered up the courage to take some vinegar/water solution to it and rub off the "high wear" areas with some 0000 steel wool, and "age" the grips a little to match. I like it a LOT better now, as it's got personality and looks like a real SAA that's been carried and used for decades.
You know, I’m not generally a fan of the artificial “relic” look, but in that case I think it’s an improvement. That flat black finish looks so wrong on these guns.
______________________________________________ Endeavoring to master the subtle art of the grapefruit spoon.
How far did you tear down the gun to do this? I’ve never even removed a screw on a Colt clone but you took an ugly gun and made it quite nice. I’ve always been a sucker for brass frames. Nice job.
I guess my question is how did you get all the solution out when you wanted to kill the reaction?
Posts: 7548 | Location: Florida | Registered: June 18, 2005
Originally posted by pedropcola: How far did you tear down the gun to do this? I’ve never even removed a screw on a Colt clone but you took an ugly gun and made it quite nice. I’ve always been a sucker for brass frames. Nice job.
I guess my question is how did you get all the solution out when you wanted to kill the reaction?
I had the grips off and the cylinder out but otherwise left it intact for the soak and scrub. I wanted the wear on the screws and ejector housing to look more genuine. I disassembled it and hosed everything down with clean water, then hosed with moose milk, then wiped/blew it dry, then hosed with straight ballistol. I’ve been watching for any sign of rust and there’s a tad of discoloration in the cylinder bolt notches but otherwise it seems good to go.
--------------------------- My hovercraft is full of eels.
Originally posted by P220 Smudge: You know, I’m not generally a fan of the artificial “relic” look, but in that case I think it’s an improvement. That flat black finish looks so wrong on these guns.
totally agree. I’d have a hard time doing this on a polished/blued revolver.
--------------------------- My hovercraft is full of eels.
