March 27, 2017, 10:52 AM
1KPerDayReplacement mag springs P226 mec-gars?
3 of my constant use mags have stopped reliably locking back the slide every time. Is Wolff the best place for replacements? Even for the 18- and 20-rd Mec-Gars?
March 27, 2017, 01:16 PM
bubbatimeDoesnt Top Gun and Brownells have those specific mag springs? I dont think Wolf carries them?
March 27, 2017, 01:51 PM
Fredward http://www.brownells.com/magaz...rings-prod71394.aspxHere ya go. Just came off the page looking for some myself.
March 27, 2017, 11:51 PM
1KPerDayThanks. Says they're for the 15 round magazines. Think that matters? I need 18- and 20-rounders.
March 28, 2017, 01:59 AM
soggy_spinoutNo available replacement parts from Mec-Gar themselves; it's how they roll. Annoying.
Dunno if Wolff actually does the large cap mag springs. You might try SIG themselves and see if they sell replacement springs for their 20rd P226 Tacops magazines. Probably will be a Checkmate-sourced part, but it should be sized about right. Either that or buy new complete Mec-Gar mags.

March 28, 2017, 09:49 AM
NipperHave to ask if you've tried cleaning/inspecting the mag body, internals and followers. Could just be gunked up.
I don't doubt that springs may eventually crap out, but I've never had the problem. Wonder if it's related to extended capacity mags, which I never use. Did have two very old (about 30 years) 1911 practice mags with bumpers go due to popped welds on the base plates caused by dropping on concrete floors. That's it after shooting various semi's since 1972.
I've got a 1995 P229 with about 45,000 rounds on it. All the practice mags still 100%. Mostly dropped on concrete range floor.
Depending on use, I'll periodically disassemble mags for cleaning and inspection.
Good luck on your search.
March 28, 2017, 04:41 PM
1KPerDayquote:
Either that or buy new complete Mec-Gar mags.
I have new replacements. I just don't like having mags around that aren't 100% ready to go. You know?
Nipper, good thoughts and I really should have a close look at them. I've wiped them down but these have been dropped in the dust quite a few times. I marked them after they didn't lock back during a match, then came home and tried to make them fail to lock back, and they locked. Then I questioned my thumb riding the slide stop, but then I had them fail to lock in the next match (local matches, don't mean anything important, otherwise I'd have used new mags) even shooting strong hand only with my thumb locked down out of the way. So now I suspect they're just getting old and maybe a combination of my "lightish" reloads.
And I need to clean them. LOL