SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Always cocked Springer X.D. pistol
Go
New
Find
Notify
Tools
Reply
  
Always cocked Springer X.D. pistol Login/Join 
Member
posted
Should I be un cocking these when not carrying,
( Home in the closet)

Is there some kind of striker spring abuse that I don't know about?





Safety, Situational Awareness and proficiency.



Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
 
Posts: 55450 | Location: Henry County , Il | Registered: February 10, 2004Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by bendable:
Should I be un cocking these when not carrying,
( Home in the closet)

Is there some kind of striker spring abuse that I don't know about?


I store all of my striker guns with the triggers pulled as a matter of habit. The highly visible cocked striker indicator on the XD is all the more reason to do this.

You will not have any mechanical issues with the striker spring if you leave it with the striker cocked, either.
 
Posts: 5301 | Location: Iowa | Registered: February 24, 2011Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
Springs wear from repeated cycles of compression and release, not from remaining compressed.

Leaving strikers cocked, or magazines loaded, for long periods of time will not have a detrimental effect.
 
Posts: 33685 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
E tan e epi tas
Picture of cslinger
posted Hide Post
While I store unloaded strikers (Glocks etc) with the triggers pulled and strikers released just as a matter of visual safety for me I’ve never had a striker spring fail from staying cocked.

Like you, many years ago I worried a bit about strikers being left cocked. I then used Glocks and XD’s as primaries for a long time. I’ve had strikers cocked on some guns for many many years and never had an issue.

Like was said, in general terms, a properly designed and heat treated spring wears from use not simply from compression. They may take a bit of a set but properly designed springs are designed for that.

Long story short. You have no worries with your XD.


Take Care, Shoot Safe,
Chris
 
Posts: 8090 | Location: On the water | Registered: July 25, 2002Reply With QuoteReport This Post
E tan e epi tas
Picture of cslinger
posted Hide Post
quote:
or magazines loaded, for long periods of time will not have a detrimental effect.


…unless your welds fail on your Colt branded 1911 magazine and your rounds come out the bottom like a full auto Pez dispenser………I’m not bitter……not at all. Mad Big Grin


Take Care, Shoot Safe,
Chris
 
Posts: 8090 | Location: On the water | Registered: July 25, 2002Reply With QuoteReport This Post
Member
posted Hide Post
Thanks folks,





Safety, Situational Awareness and proficiency.



Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
 
Posts: 55450 | Location: Henry County , Il | Registered: February 10, 2004Reply With QuoteReport This Post
"Member"
Picture of cas
posted Hide Post
quote:
Originally posted by RogueJSK:
Springs wear from repeated cycles of compression and release, not from remaining compressed.


Apparently "springs" didn't get the memo. That oft repeated claim is as accurate as "cake tastes like chocolate".
 
Posts: 21587 | Location: 18th & Fairfax  | Registered: May 17, 2003Reply With QuoteReport This Post
Member
posted Hide Post
Perhaps all springs are not created equal





Safety, Situational Awareness and proficiency.



Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
 
Posts: 55450 | Location: Henry County , Il | Registered: February 10, 2004Reply With QuoteReport This Post
Internet Guru
posted Hide Post
Compression can eventually weaken a spring.
 
Posts: 2151 | Registered: April 06, 2013Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
quote:
Should I be un cocking these when not carrying,

You can't with these unless you unload it and pull the trigger (aimed in a safe direction). And other than cleaning or if you wish to dry-fire practice, there is really no reason you have to unload it. You don't have to worry about whether the gun is loaded or not if it's always loaded.
 
Posts: 29352 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Compression can eventually weaken a spring

Sure in a theoritical sense but for quality springs not in any practical timeline. 100+ yo magazines left loaded work fine.
I wouldn't worry about this from a spring point of view. I do think from a safety point of view one should store guns in as inert state as possible.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
 
Posts: 11338 | Registered: October 14, 2004Reply With QuoteReport This Post
Member
posted Hide Post
Spoke wile a customer service rep. Over in Geneseo briefly.

He says that there is no history that he see of springs having to be replaced,
Weather compressed or not,
Said I shouldn't be concerned.





Safety, Situational Awareness and proficiency.



Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
 
Posts: 55450 | Location: Henry County , Il | Registered: February 10, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Always cocked Springer X.D. pistol

© SIGforum 2025