Don't know if anyone asked but is this new grip frame(The Aluminum frame) compatible with gen 1 Mags? or only for the Newer Gen 2 mags?

Legion grip requires that the 17 round mags have Legion (or Henning) baseplates.

quote:

Originally posted by Pete K:
Legion grip requires that the 17 round mags have Legion (or Henning) baseplates.

Only if you're using the magwell. Take off the magwell and regular baseplates work fine.

So do 21 round mags.

I think Bush is asking about the square peg baseplates vs the round peg baseplates?

The legion uses the TXG (tungsten-infused) polymer grip. The AXG uses the alloy grip.

In both cases, it's an x-grip module, which does not take the older style magazine base plates.

If you have an older magazine with the rounded dog-ears made for the original P320 grip module, then you have four choices for that magazine:

Use it only in older style P320 grip modules with the cutout at the bottom;

Cut the dog ears off, making it useful for all grip modules (except for magazine well flares);

Bevel the dog ears to match current edition magazines;

Buy new magazine base plates (about nine bucks).

This is true of all the x-frame grips, and also true of the Wilson grip modules. If it's any grip module other than the original P320 grip module with the cut-outs at the bottom of the grip, then you'll need to either modify the magazine dog earss by beveling or cutting them off, or replace them with current style baseplates.

Another option is to buy compatible base plated. 3.99 for 3 at CDNN. I bought brown to keep mine separated.