SIGforum
Hudson H9

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/1550071714

October 24, 2017, 11:21 AM
NoQuota
Hudson H9
WOW! I think he likes it a little bit?!?!?

Thanks a ton for the link!

I NEED this gun!


Si vis pacem, para bellum
October 24, 2017, 08:18 PM
bluesjuke
quote:
Originally posted by BuddyChryst:
quote:
Originally posted by NoQuota:
Not working for me, but then I'm trying to use my wife's assbook page, because I refuse to join the cult.

Is that his personal page? Or on the sentinel concepts page?




Personal page it appears. I added a second link that may or may not work:

https://m.facebook.com/story.p...481686453406%2F&_rdr



Great video, thanks! At 11:40 with the very hot ammo was sweet watching it perform as it did.
October 25, 2017, 05:54 PM
Dakor
Glad to see the pistol humming along, only 200 more reviews to go before I’m comfortable putting down some money. Maybe it’s just me, but I thought S Fisher came across like a douche. There’s no substitute for Hickok.
October 25, 2017, 06:49 PM
NoQuota
Funny you should say that, I saw a post where he basically laughed at someone else suggesting that Hickok 45 should do a review.

He definitely has an arrogance about him for sure.

Hickok is a likable guy, and a great shot, I look forward to hearing his two cents about the H9.


Si vis pacem, para bellum
October 26, 2017, 02:22 PM
Dakor
Another review posted on Hudson’s Fecesbook page:
https://m.facebook.com/Hudson-...ge_internal&mt_nav=1

I don’t understand running a new gun without first degreasing & lubricating it, but at least the reviewer owned up to it. Anyway, a more subjective review than others. I wonder if the trigger pinch issue is s result of the curved downward trigger bar safety device, something perhaps Gaston realized would happen if one was oriented in such a manner (depending on the size/shape of the guard). Will be interesting to hear if others experience the same over time.
October 26, 2017, 06:10 PM
pedropcola
Is it me or did thevgun fail to lock back on last round every time?

Did appear to shoot flat. Never heard or asym or atom ammo though. Giddy guy in general. Safes full of guns.
October 26, 2017, 06:33 PM
BuddyChryst
Steve Fisher has big hands and always rides the slide catch, he says as much in the video.


------------------------------------------------
Charter member of the vast, right-wing conspiracy
October 26, 2017, 10:34 PM
pedropcola
I couldn’t watch the whole thing so I guess I missed that.
October 31, 2017, 09:54 PM
NoQuota
https://youtu.be/vFuC7RKnb7A


Si vis pacem, para bellum
October 31, 2017, 11:16 PM
soggy_spinout
Watched a couple of reviews on YT, and it's intriguing all right. Still needs beta testers, though; the 5-minute review guy had one extraction failure as he neared the 300 round mark.

Since I keep forgetting how to embed videos:
https://www.youtube.com/watch?v=hlglkfOb0_o
November 01, 2017, 04:45 AM
bluesjuke
More of these are getting out there and so far all reports I have heard from owners has been positive.
November 01, 2017, 04:56 PM
bluesjuke
quote:
Originally posted by NoQuota:
https://youtu.be/vFuC7RKnb7A



Thanks, some good internal shots in there.
November 01, 2017, 05:22 PM
eweiss
https://youtu.be/Wa9RewLsmAA (New Torture Test)
November 01, 2017, 08:15 PM
NoQuota
Interesting video.

I'm not sure if my P226, P320, Colt 1911, or my Shield 9 would have fared any better?


Si vis pacem, para bellum
November 02, 2017, 11:11 PM
Dakor
Less than stellar...

https://youtu.be/15kolAVD3gk
November 03, 2017, 04:36 AM
bluesjuke
I have seen very few complaints among the owners reports I have read so far which have been more reports I expected to see this soon.

Cy Hudson has been good about personally addressing them also.
November 03, 2017, 07:45 AM
NoQuota
quote:
Originally posted by Dakor:
Less than stellar...

https://youtu.be/15kolAVD3gk


The magazine release was obviously way out of spec, shame on the parts supplier, and shame on the person who assembled this particular gun!

With it also missing the set screw from the rear sight, it seems like it was rushed out the door, which is terrible for Cy and Lauren who are trying to turn out a solid product.


Si vis pacem, para bellum
November 03, 2017, 02:19 PM
Dakor
quote:
Originally posted by NoQuota:
quote:
Originally posted by Dakor:
Less than stellar...

https://youtu.be/15kolAVD3gk


The magazine release was obviously way out of spec, shame on the parts supplier, and shame on the person who assembled this particular gun!

With it also missing the set screw from the rear sight, it seems like it was rushed out the door, which is terrible for Cy and Lauren who are trying to turn out a solid product.


Agreed & hopefully they’ve hired experienced people who can right things. What was most disappointing was the uneven nature of the slide’s milling - that should have been caught/rectified unless their spec is too loose.
November 10, 2017, 10:42 AM
NoQuota
https://youtu.be/1SzzESGiBiI


Si vis pacem, para bellum
December 02, 2017, 12:26 PM
Rucker
Just as an FYI, the exact same problem happened on the H9 that I picked up last night. Magazines would hang up on the magazine catch and most of the time wouldn't go into the magwell. I did the same thing as the video above:

o Removed the magazine release by pressing the mag release button in while turning the screw 1/4 turn, then pulling the magazine release assembly out of the right side of the gun. Note that the assembly stays completely together as one unit for this. Very good design.

o Used a metal file to carefully trim off the metal on the magazine catch that was hitting the top lip of the magazine. I also smoothed out the leading (towards the bottom of the grip) edge of the magazine catch a bit. In between gentle sessions with the file, I put the magazine release catch back into the gun and tried it with my magazines. I did this a couple of times and finally found the sweet spot where it's rubbing a tiny bit on the magazine, but not impeding its progress into or out of the magwell. All is well (pun intended) now.

I did this voluntarily as I didn't want to have to send it back to the factory with a (maybe) several week turnaround. A bit annoying, but easily fixed. I knew what I was in for when I decided to be an early adopter.