SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    XCompact and X-Carry: Any threaded barrels available?
Go
New
Find
Notify
Tools
Reply
  
XCompact and X-Carry: Any threaded barrels available? Login/Join 
Member
Picture of rvbgtr
posted
Regarding the XCompact, is anyone making threaded barrels for this model?

Regarding the current X-Carry, I understand it uses the same barrel as the normal P320 compact 3.9" barrel. Has anyone confirmed that that? I ask because I believe the original X-Carry used a larger outside diameter barrel and there were no threaded barrel options that I was aware of.

Thanks in advance for the feedback.
 
Posts: 798 | Location: Treasure Coast, FL | Registered: June 09, 2005Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
Somewhat confusingly, the X-Compact uses a Subcompact-length 3.6" barrel and corresponding Subcompact-length slide.

So it's 0.3" shorter than the Compact/Carry/X-Carry.

I don't know if the barrel diameter is different from the standard P320 Subcompact barrel.
 
Posts: 33318 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
Member
Picture of rvbgtr
posted Hide Post
Thanks RogueJSK. Revised my post.

I'm looking for a threaded barrel for an xcompact with the 3.6" barrel.

Also trying to figure out if the current X-Carry with the 3.9" barrel is compatible with the Sig replacement threaded P320 compact barrels.

Thank you
 
Posts: 798 | Location: Treasure Coast, FL | Registered: June 09, 2005Reply With QuoteReport This Post
Member
posted Hide Post
Yes carry and compact barrels are the same. The only difference is the grip length.
 
Posts: 550 | Location: Texas | Registered: November 15, 2012Reply With QuoteReport This Post
Member
Picture of rvbgtr
posted Hide Post
XCompact has a 3.6” barrel same as the P320 subcompact.


quote:
Originally posted by Factor8:
Yes carry and compact barrels are the same. The only difference is the grip length.
 
Posts: 798 | Location: Treasure Coast, FL | Registered: June 09, 2005Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Also trying to figure out if the current X-Carry with the 3.9" barrel is compatible with the Sig replacement threaded P320 compact barrels.


I believe the original P320 X-VTAC used a slightly different barrel / slide that had a tighter lockup than the rest of the P320 line. I don't recall if the original X-Carry also used it. Regardless, I can't guarantee it but I'm pretty sure I had read the 2nd generations of both used the standard P320 barrel and slide profiles. The new part numbers for the 2nd gen's each ending in "-R2".

I recall it being contentions at the time when the new catalog was first released as some were upset the tighter lockup was gone but others were happy as it was easier to drop in a factory threaded barrel.
 
Posts: 393 | Location: Michigan | Registered: November 30, 2018Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by rvbgtr:
XCompact has a 3.6” barrel same as the P320 subcompact.


quote:
Originally posted by Factor8:
Yes carry and compact barrels are the same. The only difference is the grip length.


You are correct. But I said the carry and compact. Not the Xcompact.

The Xcompact name really messed some things up because the Xfull and Xcarry match up in size with their non Xline guns but the Xcompact matches the grip of a compact but the slide of a subcompact.
 
Posts: 550 | Location: Texas | Registered: November 15, 2012Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    XCompact and X-Carry: Any threaded barrels available?

© SIGforum 2024