March 01, 2020, 07:34 PM
neex226 stuck decock lever
I recently got a W. German P226.
Occasionally, the decock lever gets stuck is the down position.
Never expereinced this with my never one or with any other 226.
I'm assuming this isn't normal, but I wanted to check here, as I did just get the gun back after sending to Sig for their full service, etc.
March 01, 2020, 08:57 PM
hrcjonUh. send it back. its not normal.
March 01, 2020, 10:48 PM
SigM4When you say stuck do you mean you can’t push it back up, so frozen in place, or does it just go limp?
March 02, 2020, 02:16 AM
12131quote:
Originally posted by neex:
I recently got a W. German P226.
Occasionally, the decock lever gets stuck is the down position.
Never expereinced this with my never one or with any other 226.
I'm assuming this isn't normal, but I wanted to check here, as I did just get the gun back after sending to Sig for their full service, etc.
I'll assume that this didn't happen before you sent it in for their full service. In SIG Full Service, the only thing decocking related that is replaced is the decocker spring. So, maybe check that spring out for any abnormalities. Maybe it's pressing too hard against the decocker's surface?
March 04, 2020, 01:28 AM
1lowlifequote:
Originally posted by 1KPerDay:
OEM grips?
This...........^
Does it have the original grips?
If not, perhaps the grip is hindering the decocker from upward travel...
March 04, 2020, 05:02 AM
Blume9mmquote:
Originally posted by 12131:
So, what happened to OP?
The original poster joined here 9 years ago and has made 118 post in that time... not like some of us, some people don't live on the internet or in front of their computer.
March 04, 2020, 06:06 AM
12131quote:
Originally posted by Blume9mm:
quote:
Originally posted by 12131:
So, what happened to OP?
The original poster joined here 9 years ago and has made 118 post in that time... not like some of us, some people don't live on the internet or in front of their computer.
That's cute. You don't need to "live on the internet", when you're asking questions / for help.
https://sigforum.com/eve/forums...935/m/2300086664/p/1March 06, 2020, 11:15 PM
mo4040I had this issue on a W. German P226. I ended up replacing the de-cocking lever and the de-cocking lever bearing.
Problem solved.