SIGforum
OAL for AR and MPX for Form 1?
June 20, 2018, 08:05 PM
Oat_Action_ManOAL for AR and MPX for Form 1?
I'm in the process of filling out my first Form 1s to make two SBRs.
Can anyone help me with the OALs of the two guns?
One is an LMT CQB which will have an 11.5" barrel.
The other is an MPX pistol with an 8" barrel.
Any other Form 1 mishaps to avoid? I'm filing as an individual.
----------------------------
Chuck Norris put the laughter in "manslaughter"
Educating the youth of America, one declension at a time.
June 20, 2018, 08:28 PM
creslinwell it depends what stock you plan on putting on them.
IIRC.. the OAL is with the stock fully extended
This is where my signature goes. June 20, 2018, 09:00 PM
12131quote:
Originally posted by creslin:
IIRC.. the OAL is with the stock fully extended
Correct.
Q
June 20, 2018, 09:20 PM
SigM4As info my 11.5” BCM with a CTR is 31.25” overall. Would assume you’d be somewhere close to that.
Success always occurs in private, and failure in full view.
Complacency sucks… June 21, 2018, 12:17 AM
Oat_Action_ManWell I guess I can just measure the current length of the LMT and subtract 4.5", but that still leaves the MPX.
----------------------------
Chuck Norris put the laughter in "manslaughter"
Educating the youth of America, one declension at a time.
June 21, 2018, 07:26 AM
DaBigBRMeasure the MPX muzzle to rear pic rail and then get a measurement for the stock you want. I had decent luck with my MP5K SBR by just Googling it. I found a few sources that agreed and went with that.
June 21, 2018, 10:30 AM
Oat_Action_ManSo I actually found some numbers for an MPX in an early review and both the side folder and the collapsible stocks on an 8" barrel seem to bring it in below 26" when fully extended.
The side folder seems to be 25.75" and the collapsible stock is 25.25".
----------------------------
Chuck Norris put the laughter in "manslaughter"
Educating the youth of America, one declension at a time.
June 21, 2018, 03:30 PM
nhracecraftquote:
Originally posted by Oat_Action_Man:
Well I guess I can just measure the current length of the LMT and subtract 4.5", but that still leaves the MPX.
For reference, I have an LMT CQBPS12 (Factory SBR w/ 12" Barrel) and my Form 4 indicates an OAL of 32.25"
____________________________________________________________
If Some is Good, and More is Better.....then Too Much, is Just Enough !!
Trump 2024....Save America!
"May Almighty God bless the United States of America" - parabellum 7/26/20
Live Free or Die!