NFA wait times

October 05, 2016, 11:29 AM

mesabi

HeavyD Trust Form 4's mailed 28 Feb 2016, checks cashed first week of March, dealer emailed me yesterday to tell me approval has been received and that my Liberty Regulator and SilencerCo Omega were ready for pick-up.

Paperwork for a Dead Air Mask was submitted a few weeks later, so maybe by Thanksgiving...

October 05, 2016, 02:20 PM

kimberkid

quote:
Originally posted by 308th_sps:
quote:
Originally posted by gw3971:
I submitted my SBR paperwork mid may and it came back approved 4 months later in mid September.

4 months? Heresy I say!! Heresy!

From what I understand it depends on the workload of the examiner you get ... they all have a back load but some more than others.

For instance:

quote:
Originally posted by rbh350:
quote:
Originally posted by Zecpull:
Still waiting for my March 1st.. That he thought would be here in July.

I'm in the same boat, check cashed 3-1 for my trust, still waiting.

I got my March 17 form 1 e-file on August 31 IIRC

.

October 05, 2016, 10:20 PM

Peanut71

AAC Tirant 45M on a form 4 trust just came home.
Check cleared/pending 3/1/16
Approved 9/26/16
Stamp arrived 10/4/16

October 07, 2016, 11:44 AM

Creeping_Death

.22 can, heavy d trust, form 4 submitted 2/12, picked it up 10/5. Just under 8 months.

October 07, 2016, 01:51 PM

moots226

(3)Form 4 trust checks cashed 3/2, stamps approved 9/21,22,28, stamps arrived 10/5.

October 08, 2016, 02:03 PM

Twist

quote:
Originally posted by swage:
quote:
Originally posted by Twist:
I was making jokes to my friends that the 2nd suppressor stamp was going to be in before the 1st one, and I was less than a week from being right.

Form 4 on trust Submitted- January 28, 2016

Check clears the bank- February 4, 2016

Stamp at dealer- July 6, 2016

Scheduled to pick up my Sandman L at the gun show- July 23, 2016

I have a Sandman L awaiting approval. I won't see mine until at least November. Please do a review when you get possession of yours. I'm interested in seeing an unbiased review of the Sandman L. I've watched every video on Youtube about the Sandman L I could find.

Swage, I apologize for the delay on this but work has been killing me for a while.

I finally had a chance to run some through the L this weekend and from my experience, you're going to be a happy guy once your stamp comes in. Shooting the S and then the L, there's almost no noticeable difference from behind the rifle but standing about the 4 o' clock position from the shooter, you can tell the L is slightly quieter and the tone was a tad deeper.

If you want to know anything else, my email is in my profile. Please feel free to use it at will.

October 08, 2016, 06:22 PM

swage

Thanks for the review Twist. I don't expect to see mine until January. I debated long and hard about which one to get. Ultimately they had an L in stock so that's what I went with. A "bird in hand" kind of thing I guess. I also picked up a Mask at the same time. Bow season just started so I won't be doing much shooting until January anyways.

My only other question would be POI shift. I understand that with it's mounting system that it should be repeatable. Since this is being mounted on several rifles I'd be interested to see what your findings are.

October 08, 2016, 08:44 PM

Twist

quote:
Originally posted by swage:
Thanks for the review Twist. I don't expect to see mine until January. I debated long and hard about which one to get. Ultimately they had an L in stock so that's what I went with. A "bird in hand" kind of thing I guess. I also picked up a Mask at the same time. Bow season just started so I won't be doing much shooting until January anyways.

My only other question would be POI shift. I understand that with it's mounting system that it should be repeatable. Since this is being mounted on several rifles I'd be interested to see what your findings are.

I honestly didn't notice a PoI shift with either suppressor as opposed to shooting it with just the muzzle device and there was none at all when going from the S to the L. Granted, after function checking the rifle when bore sighted it's been suppressed the entire time but the rounds through it pre and post suppressor before fine tuning it were in a very comparable location.

In regards to the location of the S as opposed to the L, no difference at 100 yards.

October 09, 2016, 12:25 AM

swage

quote:
Originally posted by Twist:
quote:
Originally posted by swage:
Thanks for the review Twist. I don't expect to see mine until January. I debated long and hard about which one to get. Ultimately they had an L in stock so that's what I went with. A "bird in hand" kind of thing I guess. I also picked up a Mask at the same time. Bow season just started so I won't be doing much shooting until January anyways.

My only other question would be POI shift. I understand that with it's mounting system that it should be repeatable. Since this is being mounted on several rifles I'd be interested to see what your findings are.

I honestly didn't notice a PoI shift with either suppressor as opposed to shooting it with just the muzzle device and there was none at all when going from the S to the L. Granted, after function checking the rifle when bore sighted it's been suppressed the entire time but the rounds through it pre and post suppressor before fine tuning it were in a very comparable location.

In regards to the location of the S as opposed to the L, no difference at 100 yards.

That's good news since mine will have multiple hosts. My OCD would probably kick in and I'd spend half the day re-zeroing my rifles instead of having fun shooting them.

October 11, 2016, 05:06 PM

StorminNormin

Ugh that was a long wait. 8 months and 2 days but I picked up my two suppressors today. I ordered an Octane 45K and Spectre II from Capitol Armory here in Austin on 2/8/16 and they sent the Trust form 4s on 2/9/16. Just got the email today at 3:30pm that they were ready for pick-up and drove across Austin in terrible traffic to get them, but now they are in my hands!

Here is a crappy cell phone pic of both on their current hosts:

October 11, 2016, 07:31 PM

SigM4

quote:
Originally posted by StorminNormin:
Ugh that was a long wait. 8 months and 2 days but I picked up my two suppressors today. I ordered an Octane 45K and Spectre II from Capitol Armory here in Austin on 2/8/16 and they sent the Trust form 4s on 2/9/16. Just got the email today at 3:30pm that they were ready for pick-up and drove across Austin in terrible traffic to get them, but now they are in my hands!

Here is a crappy cell phone pic of both on their current hosts:

You're gonna have some fun. And just in time for cooler (i.e. shooting) weather in Texas.

October 11, 2016, 09:31 PM

StorminNormin

quote:
Originally posted by SigM4:
You're gonna have some fun. And just in time for cooler (i.e. shooting) weather in Texas.

Yup, I have off from starting a new job until Monday and have a lot of yard work planned, but now I need to squeeze in some shooting and gun cleaning!

October 11, 2016, 10:07 PM

creslin

congrats man.
I have to wait until december (if i'm lucky) for my first can to come back.
after that however it's gonna be a can bonanza - i have 13 of them coming due in about a 2 month period.
sadly it's right in the middle of winter... ugh.

October 12, 2016, 05:08 PM

rbh350

HeavyD Form 4 Trust for Silencerco Sparrow mailed 2-22-16
Check Cashed 3-1-16
Approved 9-28-16
Tax Stamp arrived and suppressor picked up 10-12-16

There is hope out there somewhere for all of you still waiting. Good luck.

October 12, 2016, 06:35 PM

tenmm

Eforms SBR submitted 4-20-16, stamp recieved 10-12-16.
The PS90 is getting a trim!

October 12, 2016, 07:52 PM

AllenInAR

I just learned that in order to get the suppressor I want, it'll be 4-6 weeks JUST to get to the point where I can go to the dealer and do the paperwork.

But tomorrow I send off my stuff to build an SBR, so I'm just happy to get the ball rolling.

October 17, 2016, 02:12 PM

David W

quote:
Originally posted by AllenInWV:
I just learned that in order to get the suppressor I want, it'll be 4-6 weeks JUST to get to the point where I can go to the dealer and do the paperwork.

Any way to pass on it and find something you want in stock?