SIGforum
Simple Green Extreme

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/380105858/m/4350039225

November 19, 2026, 10:01 PM
RNshooter
Simple Green Extreme
Hey all-

I did some online research and decided that Simple Green Extreme aircraft formula was the ticket for my titanium printed suppressor. I'm hoping that some of you have played with it already.

What procedure/dilution do you use for soaking a rimfire can? I don't want to melt it or ruin the finish. I am not using an ultrasonic, just a mason jar.

Any pearls to share?

Bruce






"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams

“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free."
-Niccolo Machiavelli

The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
November 20, 2026, 08:30 AM
fischtown7
Following. Picked up a Huxwrx and cannot see paying $70 for their suppressor sauce.
November 21, 2026, 08:14 PM
hrcjon
I use simple green aircraft in my ultrasonic for some cleaning uses but I don't use it as a soak method for suppressors. The normal suggestion for how I use it is 1:10. The simple green manual lists ratios from 1:3 to 1:30 for various uses. But its low cost and won't hurt your can so id just try a few mixes and see if it works. rimfire suppressors are about lead not copper as you get in CF and I don't see anything in SG that seems likely to do much about it just soaking.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
November 21, 2026, 11:13 PM
SIGfourme
I was at Palmetto State Armory in Myrtle Beach. They have several Huxwerz suppressors that have been cut longitudinal to show the system. They were center fire suppressors. There was a lot of fine carbon sediment in the compartments. Soaking in Carbon Cutter would be better.
November 22, 2026, 09:01 AM
P220 Smudge
quote:
Originally posted by hrcjon:
I use simple green aircraft in my ultrasonic for some cleaning uses but I don't use it as a soak method for suppressors.


Yeah, same. I'll be honest, I don't think soaking it in Simple Green of any formulation is going to do shit. The suggestion for Simple Green Aircraft grade is usually for what to use in conjunction with an ultrasonic cleaner to help keep from guaranteeing that you eat the anodizing off aluminum, but it is still possible with enough time and heat regardless of the cleaning agent you use. Even then, it only gets suppressors so clean without something like Breakfree or similar. Now, the price of Breakfree went bonkers, but the good news is you can use it over and over and over, and you can use it in an ultrasonic cleaner. I use glass jars in the ultrasonic for cans and whatever else so I don't have to change the water every single time, and have a jar of evil looking black stuff tucked away in the garage I've been using for over a year now, still works great. I don't know how many times I've used that particular jar of Breakfree, but I still have a half bottle of the unused stuff left. It doesn't get them spotless, but a heated bath in that stuff gets 95% of the crap off and that's all I care about. Do with that as you will.

Soaking or filling a titanium can with CLR is a known and common cleaning strategy, but CLR eats Cerakote if you leave it in contact for more than a half hour or so according my search.

I say it a lot, and I'll say it again here: I think having an ultrasonic cleaner ought to be considered a standard part of the gear if you're going to shoot suppressed. In terms of thorough, fast, easy cleanup, it is unbeatable.

I have the 10L version, it is $140 currently. I can take my Stribog upper entirely off and submerse it in mine. If I was ever going to upgrade, I'd go for a 15 or the 22L.

https://www.amazon.com/Tek-Mot...G2/ref=sr_1_8?sr=8-8

If you're dead set against losing workbench real estate, then get the 2L for $40, you'll still be able to do suppressors and bolt carrier and trigger groups in it, it'll pay for itself in terms of time saved several times over in the first year of ownership.

Oh, and the only place manufacturing home or hobbyist grade ultrasonic cleaners is China. From there, it leaps to "I'm writing this off as a business expense" prices for one made in Germany, so pick literally whatever cheap ultrasonic cleaner best fits your needs and budget for a cheapie and don't worry about trying to buy American, because that's not even a choice here.


______________________________________________
"If the truth shall kill them, let them die.”

"A man who does not read has no appreciable advantage over a man who cannot read."
November 22, 2026, 09:45 AM
sigfreund
Thunder Beast specifically cautions against allowing CLR to contact the direct threads or the Cerakote finish of their suppressors when soaking. I also recall a warning, I believe it was someone from Vudoo Gun Works, against using CLR as a bore cleaner to remove carbon because it could etch the metal.




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
November 22, 2026, 10:07 AM
RNshooter
P220 Smudge-

I have no hesitations about buying or using an ultrasonic cleaner. I am surprised I haven't gotten one.
I just want to make sure whatever potion and procedure I use won't ruin my precious gun mufflers.
Cerakote from black to charcoal grey? Cool. Just don't eat holes in my 3D-printed titanium doohickey.

I will pick one up on Black Friday.

Can you or someone else post a step-by-step that is guaranteed to not *physically ruin* titanium and Inconel?

Thanks everyone for the knowledge.

Bruce






"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams

“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free."
-Niccolo Machiavelli

The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
November 22, 2026, 10:41 AM
P220 Smudge
quote:
Originally posted by sigfreund:
Thunder Beast specifically cautions against allowing CLR to contact the direct threads or the Cerakote finish of their suppressors when soaking. I also recall a warning, I believe it was someone from Vudoo Gun Works, against using CLR as a bore cleaner to remove carbon because it could etch the metal.


Yeah, this is 100% a "for 100% titanium suppressors only" thing. CLR does bad, bad things to anything that contains iron. There are a few "wow I fucked up" posts in the NFA subreddit involving such over the last several years that I've seen.

quote:
Originally posted by RNshooter:
P220 Smudge-

I have no hesitations about buying or using an ultrasonic cleaner. I am surprised I haven't gotten one.
I just want to make sure whatever potion and procedure I use won't ruin my precious gun mufflers.
Cerakote from black to charcoal grey? Cool. Just don't eat holes in my 3D-printed titanium doohickey.

I will pick one up on Black Friday.

Can you or someone else post a step-by-step that is guaranteed to not *physically ruin* titanium and Inconel?

Thanks everyone for the knowledge.

Bruce


Absolutely. An ultrasonic cleaner will not physically damage steel or titanium, so you won't have to worry about eating holes in your can. It's great for that.

What I do from start to finish, assuming you've filled the ultrasonic to the operating level and/or degassed the water you filled it with according to the manual and all that:

Place suppressor(s) in lidded glass jar and if we're using Simple Green, fill that jar with water and then a capful of the Simple Green.

Screw lid firmly shut and place the jar in the ultrasonic.

Turn on the ultrasonic, set it to 50-60c and let it all come to temp together so you're not shattering glass with temperature differentials and thermal shock antics. Don't ask me how I know. Razz

When it's up to temp, run it for a cycle for 10-15 minutes, depending on how dirty the can is and your comfort level.

Repeat as necessary until the can is clean enough for your liking. The jar is going to be solid black and murky before the end of the first cycle, and it doesn't have to be clean for subsequent cycles to continue removing caked carbon and crud. If you go much past 60c and for more than an hour, you can start to etch swirl marks into the Cerakote - I've done it with both Cerakote and Norrel's Moly Resin finished suppressors both, no paint is 100% immune to it, but also, I don't believe there's actually a cleaning method out there that's aggressive enough to attack caked carbon that is gentle enough to not put wear on a paint type finish. We simply can't have it all. Breakthrough is supposed to not attack Cerakote, but if you forget and leave a suppressor in a jar of Breakthrough for a month, you'll see otherwise. Don't ask me how I know. Razz

Oh, and while some guys like Ziplok bags for use in ultrasonics because they're cheap, can't leave broken shards if you have an "ooops" and they conform to the shape of the part, all plastics dampen the ultrasonic frequencies that make the magic happen, whereas glass transmits them. Is it enough to matter? I don't know, but I have had a bag soften enough to rupture, and I actually had a reasonably easy time cleaning out the glass shards the one time I had a learning experience in the other direction, so I stick with glass food jars. Suppressors too big for that had me source some tall lidded juice jars on Amazon, I'm probably set for life.

Oh! And don't feel like the jar needs to be laying on its side in the ultrasonic to get clean. The lid will walk loose and leak suppressor cleaner and black stuff into the water and you'll get a dilution of the good stuff inside the jar with water from the tank. No bueno. The jar and suppressor both can sit proud of the water line and still get clean because now the jar and the water inside are transmitting ultrasonic frequencies as well, so you still get cavitation on/inside the can above the waterline of the tank.


______________________________________________
"If the truth shall kill them, let them die.”

"A man who does not read has no appreciable advantage over a man who cannot read."
November 22, 2026, 11:23 AM
sigfreund
Wow! That was a fantastic discussion that addressed everything I was wondering about myself, and some things I didn’t even know to consider. Yours should be a stickied post.

I had an ultrasonic cleaner that I ended up not using for cleaning parts and gave away, but getting another to avoid the hassles of other methods of cleaning my can definitely seems like a good idea now. Thanks!

Oh yeah: My suppressor is nearly 9 inches long. I assume from what you said that the jar with cleaning solvent can extend above the water line in the cleaner—correct? (I believe your statement was clear enough, but just to be sure?)




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
November 22, 2026, 11:41 AM
P220 Smudge
Happy to help! I'm a big advocate for ultrasonic cleaners after getting one and becoming an instant convert. I'm a believer.

quote:
Originally posted by sigfreund:
Oh yeah: My suppressor is nearly 9 inches long. I assume from what you said that the jar with cleaning solvent can extend above the water line in the cleaner—correct? (I believe your statement was clear enough, but just to be sure?)


Yessir. At least, that's my finding, and the jars and suppressors I've done this with have all been at least about half submerged to the fill line in the ultrasonic's tank, which shouldn't be a problem to pull off with any but the smallest hobbyist jewelry-minded ultrasonics.


______________________________________________
"If the truth shall kill them, let them die.”

"A man who does not read has no appreciable advantage over a man who cannot read."
November 22, 2026, 12:33 PM
RNshooter
Really excellent information!
I also sourced glass juice jars from Amazon. It took a few tries to find one that closely fit my Quantum 22k so it would be efficient with the expensive suppressor solvents. I have a gallon of the Simple Green Aviation now so that's less of a concern.
My Omega 300 fits just barely in a quart mason jar once the mount and cap are removed.

I can research ultrasonic cleaners but I won't say no to a link if anyone has a favorite.
Edit: I followed the link already posted.

Bruce






"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams

“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free."
-Niccolo Machiavelli

The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken